Jardin Air Pump Plastic Non Return 4-Piece Check Valves for Aquarium, Red/Clear

Jardin Air Pump Plastic Non Return 4-Piece Check Valves for Aquarium, Red/ClearAnyone whose had a DIY CO2 system backflush all over their floor will understand the importance of installing a checkvalve into a DIY CO2 plastic airline.

There are many companies that manufacture these devices, so its best to see if you can find some user reviews online before you purchase one.

So far, these checkvalves are doing their job.

I will update this review in the future based on my longterm experiences with these devices.

Penn Plax Net Breeder for Aquarium

Penn Plax Net Breeder for AquariumI bought one of these and a Lee's net breeder. I like the Lee's brand much better than this one. The plastic is flimsy and the net even worse. I thought I was going to rip the net as I gingerly put it on the plastic frame! And I didn't get all the tiny plastic grass things -the picture shows 5 or 6 sturdy ones; I got only 3 (that also looked & felt as if they'd fall to pieces).

Coralife (Energy Savers) ACL01219 100mc Pure Fluorescent Filter Pads, 36 by 30-Inch

Coralife ACL01219 100mc Pure Fluorescent Filter Pads, 36 by 30-InchGreat price

Kept your water clean, cut it up.Put a peice behind your Wispper filter pad .No need to change your filter pads as ofted . You will get four times the life span on the pad.

Save 32% Off

Lee's The Ultimate Faucet Adapter, Metal

Lee's The Ultimate Faucet Adapter, MetalThe plastic faucet adapter that comes with Python started to be stripped after the first usage! As a result there would be leaks at the faucet when it was used and I had to wrap a rag around it to absorb the water. I have had this metal adapter now for a month. No leaks.

This works very well-no leaks at all. My kitchen faucet was too shallow to properly screw this in (could only turn the device in two or three times to the faucet spigot, so it would not hold tight), but it works just fine with my bathroom sink faucet, and I can now water the plants on my condo terrace. Ordering one for my neighbors.

Buy Lee's The Ultimate Faucet Adapter, Metal Now

I have been using this metal adapter for 2 years, after stripping out several plastic ones. MUCH better, and worth every penny. Fits most faucets and it is great to not have to worry about the plastic ones.

Read Best Reviews of Lee's The Ultimate Faucet Adapter, Metal Here

I've sliced my thumb more than once hand tightening this onto the faucet, I recommend using some channel locks or a rag or both. I wish it didn't have the sharp serrated edge, but it's easily solved by some forethought.

Want Lee's The Ultimate Faucet Adapter, Metal Discount?

The plastic thread wears down really quickly, so I decided to get this one instead and it is much better in terms of how well it fits on, and the life of it as well.

Fair warning, I sliced my finger open trying to get it off of the tap, so be careful as thin threading is quite sharp! If it is tightened too much, best way to get it off is with pliers (won't damage it) or with a damp cloth

Save 29% Off

Hagen Aqua Clear Nano Aquarium Preset 6-Inch 25W Heater and Water Change Package for Aquariums Less

Hagen Aqua Clear Nano Aquarium Preset 6-Inch 25W Heater and Water Change Package for Aquariums Less than 10 GallonsI am using these heaters in two 3 gallon tanks. It works great! At first it ran a little high and because it has an adjustable thermostat I was able to set it to heat my fish tanks just where I wanted them to be. It looks nice and the tank inhabitants have become very active. I highly recommend for small tanks. I am ordering two more for my bettas. Current tanks using them are the africian dwarf frog/red cherry shrimp tank and the guppy tank.

The heater works well once you find the right spot with the knob for the desired temperature. The knob is relatively small and takes a bit of an effort to figure out the sensitivity from the turning.

Buy Hagen Aqua Clear Nano Aquarium Preset 6-Inch 25W Heater and Water Change Package for Aquariums Less Now

I bought this heater for my 2.5 gallon red cherry shrimp tank. It keeps my tank at 78 degreea steady. Its a great filter. Its a bit big for a 2.5, but it is easiy hidden with plants.

I would say a 5g tank would be the max i would use it on.

Great heater.

5 star

Read Best Reviews of Hagen Aqua Clear Nano Aquarium Preset 6-Inch 25W Heater and Water Change Package for Aquariums Less Here

The heater works good, the included water conditioner and cycle have kept the aquarium in balance. The fish are healthy and thriving

this was important to me as the aquarium is for my grandsons I did not want them disappointed. I recommend this to those who want a small aquarium of 5 gallons or less.

Want Hagen Aqua Clear Nano Aquarium Preset 6-Inch 25W Heater and Water Change Package for Aquariums Less Discount?

Marineland PC-ml160 Multi-stage Canister Filter

Marineland PC-ml360 Multi-stage Canister Filter- 55 to 100-Gallon, 360GPHI traded up to the C-360 after using the 350 Magnum for 7 years.

The C-360 is a great canister filter, if you pay attention to directions and use some common sense.

Keep in mind that this is a professional series filter its not for the average hobbyist who will pull it out of the box, hook it up (without understanding instruction), and watch the pretty fish swim by.

Here is what I found -

1). The filter weighs 23lbs empty it holds 2.5 gallons of water at 8.5lbs per gallon. When full of media and water, this filter weighs 45lbs. Not something you want to move around a lot.

2). Since I considered myself a semi-pro fish keeper I hooked the filter up without reading or understanding the instructions A Big Mistake. Micro-bubbles and leaking like you wouldn't believe.

3). Take the time to inventory what is in the box and understand the components.

4). Per the instructions, keep the hoses to a minimum length. A straight shot from the canister to tank is best. (I found this vital to eliminating micro-bubbles).

5). When hooking the hoses to the canister mechanism, DO NOT hand tight only. You will need to use a wrench to completely tighten. Caution do not over tighten or plastic will crack. (this step is vital to eliminating micro-bubbles)

6). Make sure the canister is full of water prior to priming. Instruction say 2 pushes of the prime button ignore this and plan on 10-15 pushes with some wait time in between.

7). Placement of the media baskets in the canister is CRITICAL. Make sure the top cylinder of each tray has the rubber gasket on (these fall off easily).

8). Place the bottom basket in the canister, next one on top. Critical that you stick your finger down the hole to make sure the 2nd tray is seated on the 1st. Repeat for all trays. Make sure they snap together.

9). Make sure to keep the rubber ring (gasket) on the top lid lubricated. I used small amounts of vaseline it works great.

10). On 1st set up you can expect micro-bubble for the first few hours. You can wait it out, or slightly tip the canister to a side to remove faster. If bubbles prolong check that your hoses are tightly connected. No hand tightening. Check that you have the shortest possible hose run and that it is not obstructed.

11). I would highly recommend this filter to anyone who want to pay attention to detail, and set it up correctly. Leaking and Micro-bubbles are for those who don't understand how the filter works.

I am not sure why other's have reviewed this filter with "micro-bubbles". I have been using my C360 for a 60-Gallon tank and have been nothing but delighted. It does take some patience setting each tray appropriately on each of the previous tray placements, but the unit is difficult to snap the top on if all trays aren't set propery. To me, this is a self evident tip, I haven't done something right... Not a problem with the unit itself. Other than a few drops of water when I remove the tubing head, there is no mess at all around the aquarium. Very easy to use, very efficient, and very quiet...

A great filter... I am buying two more for my soon to be aquired 125 Gallon...

Buy Marineland PC-ml160 Multi-stage Canister Filter Now

I am a noobie when it comes to Aquariums...however, the new home I purchased had an outdoor Koi pond, which was not deep enough to keep them out during the winter (in the Northeast). I went and purchased a 125 Gallon tank and the C-360...it is very easy to use, and when you need to clean it, just turn a knob, pull out the hoses and take the filter away without spilling but maybe a drop of water...clean it, flush it and connect it and you are back and running...VERY easy...my water looks clear and clean with 12 Koi! :)

Read Best Reviews of Marineland PC-ml160 Multi-stage Canister Filter Here

The reviews left by others had stopped me from buying the ML360 canister filter.

I was trying similar products with better reviews that ended up not working for my set up.

Fluval 306 too loud for me.

Aquastop Canister too loud, impeller rattle, not enough room for the media I liked to use. The UV Sterilizer is a plus!

As a last resort I purchased the ML360. After 1 week of running this filter I have no complaints, yet.

I wanted something that was quiet. A low hum was ok, I just didn't wan't to hear the filter when I was reading or trying to fall asleep.

I love the sturdiness of this filter, everything seems to be of good quality plastic,nothing is cheap, thin, or mediocre. Clamps snap on firmly.

The vinyl tubing has a 3/4" inner diameter and 1" outer diameter and its tough to manage, but not impossible. A few cuts and adjustments does the trick.

I was having a hell of a time keeping the intake U-tube in place while adjusting the heavy hosing. I ended up using a 90* elbow to get to the filter to prevent any kinks.

I didn't like the media that the filter came with. I use SeaChem's media (bottom to top) Carbon Matrix, PhosGuard, Purigel, Matrix, and ML Polishing Pad included with the filter.

Water flow is great, i'm using am in-line 10 Watt UV sterilizer on the return line and the water pressure hasn't gone down at all.

The water exhaust nozzle has a vent adjustment so you can aim to different streams of water, very useful. I have one disturbing the surface tension on the tank and one going down and towards the far side of the tank.

What you will like: It is quiet, NOT silent, you can hear a low hum, but it doesn't over power a quiet room. (Bedroom in my case)

What you should consider: Take an hour out of your schedule to get the tubing just right. I suggest getting some 3/4" 90* elbows if your aquarium stand has a small opening for hoses and cables. I 'd spend the extra $40 and get your own media.

Side Note: Media of good quality that will mitigate water changes and keep the aquarium crystal clear. I find SeaChem good for this. The 4 years i've been keeping fish I find that SeaChem products are the best, never had issues with Ammonia, Phosphates, Silicates and Nitrates stay around 10ppm. I usually do a 30% water change every month. Media change/re-charge every 4 5 months.

Good luck finding what you're looking for. Hope I helped you in some way.

Want Marineland PC-ml160 Multi-stage Canister Filter Discount?

Easy to get hooked up and even the filter media is included. Runs quietly and has resulted in my 55 gallon aquarium having the cleanest water I have ever had. Very impressive. Well worth the money!

Save 71% Off

Marina Hose Brush

Marina Hose BrushI have used this on both fluval 404 and a 204 lines. It is easy to use, and you will be amazed at the gunk you flush out. I run the brush through, then run some water through the filter in my sink.

Once I detached the hoses, but that was such a pain, I didn't do that again.

I'd highly recommend this if you have fluval filters. AND, I'm sure it will work on other canister filter tubing as well.

I can't really tell if water flow is better after cleaning out the tubing, but I'm sure it is improved as well, and that can only be good for both the tank and the canister filter.

I've owned a hydration pack for years and the knew the hose was getting dirty. This brush, although softer than I hoped, works very well to clean out the dirt/gunk buildup inside the hose. It's not long enough to completely push through, so you'll have to go from both sides.

I've only used it once, but it seems sturdy enough for repeated use over years. Hopefully the plastic cord doesn't crack/break

Buy Marina Hose Brush Now

I was a bit skeptical about this product at first but all doubts were removed as soon as I used the brush. I cleaned out my aquarium hoses and filter head and now water is once again flowing through my system beautifully. The reason why I gave this item a 4 out of 5 was because the brush wires are wrapped around a metal head which cannot go around sharp corners. I was still able to get into every nook and cranny so I will definitely be buying another one of these in the future.

Read Best Reviews of Marina Hose Brush Here

For the past few years I have been using a Fluval cleaning brush to clean the tube hoses for my canister filters.

When it comes to cleaning these hoses this brush works well.

I have also used it to clean the straight parts of the intake tubes on my power filters. However, I was looking for a tube cleaning brush that would be able to reach into the 90 degree angles of the U-portion of these tubes, which is next to impossible to clean.

I thought this brush would be able to do so, however, the metal wire which contains the brush bristles is too long

to make the 90 degree turn.

So I am still searching for a tube cleaning brush which can travel through 90 degree angles.

For the money, this is a nice cleaning brush.

Want Marina Hose Brush Discount?

This brush does what it is supposed to do, snake it's way through a fish hose to clean out the gunk. Sure, it does that, but this product could be better

There are barely any bristles on the brush. This means I have to go back in and out often to get a good scrubbing.

Unwinding the body (the white plastic part) is a pain and since it keeps wanting to go back to it's default shape, it is a pain to feed this through a hose

I found that the body would bend often and instead of the brush continuing down the hose, the body was just bending into the house and the brush wasn't moving. Taking it out some and trying again eventually worked.

Honestly, I haven't seen anything that is quite like this. If anyone knows of a similar product that is better be sure to comment. But for now, it does what it needs to do but it takes some work to get there.

Save 76% Off