Showing posts with label acrylic fish tanks for sale. Show all posts
Showing posts with label acrylic fish tanks for sale. Show all posts

Fluval Chi Aquarium Kit

Fluval Chi Aquarium Kit, 5-Gallon** Update/Added Comment: I just wanted to add to this review that Seachem Onyx fractured substrate (sand) is a REALLY good looking addition to these Chi setups. If you want to bring out the color of any plants or aquatic life in a Chi, especially Red Cherry or Ghost shrimp, put the Onyx substrate in there. It's pure black and sets everything off perfectly. It also contributes minerals to the water! ***

*** Update 2012-Jan-31 : A cover is now available for the Fluval Chi Fluval Chi Cover and works for the 5 and 6.6 gallon models. This is great if you're concerned about an aquatic pet jumping out. ***

*** Update 2013-Jun : About 18 months after first setting the tank up, the LED lights went out. They have been in constant use since setup, so around 13,200 hours. That's a low lifetime for LED's. The fact they all went out at once leads me to believe either the power circuitry had an issue (likely, since the low lifetime) or the LED quality was poor. I'm going to investigate, and install some new LED's of my own to increase WPG for my new natural setup. I will report back.

I didn't purchase my Chi from Amazon, but I've had it for a year and wanted to share my input. This is a perfect aquarium for some aquarium life/plants, or even just to have plants only. In fact, I'm buying two more this week for my living room!

There's several great reviews which go over the Chi in depth so I don't want to reinvent the wheel, if you'd like to see those as well just go check out the 4 & 5 star reviews.

What I want to bring attention to is the fact that most, if not all, of the reviews under the 1 & 2 star section aren't the fault of the Chi, they seem to be the fault of an inexperienced aquarist or someone who hasn't done the research on the type of life they're putting in the tank, with exception of one or two reviews which mentioned equipment problems such as the power supply going bad.

Fluval doesn't put out poor products, they are TOP NOTCH. As such I wanted to share general "good aquarist" habits and my personal experience with the Chi, so all can rest assured it's a solid product. Let me comment on a few common things I found in the "bad" reviews, to help guide those who may be on the fence.. here's a quick index of my review, skip to the section which interests you the most:

Review Index:

* My Present Setup 1 year and loving it

* Use Live Plants AKA, how to enhance water quality, aquarium life and cut down on algae

* Lidless Aquarium This isn't bad, just do research

* Filtration on the Chi sucks AKA, It's actually a perfect design

* Don't follow the Filtration Instructions AKA, follow these instead

* Brown Goop on the Cube This is normal

* Loud Chi/Filtration Noises AKA, I'm probably not maintaining the proper water level

* I have algae problems because the Chi sucks AKA, I'm probably not taking proper care of the water

* I had a bunch of fish and the Chi killed them AKA, I put too many fish in and I killed them

THE REVIEW:

* MY PRESENT SETUP, one year later I'm still loving it

What I have:

* I have mine at work.

* I have 6 live plants in it (mentioned in the section below)

* A compact heater to maintain temperature, which lays in the back behind the cube which sits on the bottom, so it's out of view.

* I have a small air line running in the back over the heater, also out of view--I use this to help maintain gas exchange. This is primarily because I don't want excess C02 to buildup in the water because if the marine life I have in the aquarium (dirtier life than normal). I hardly hear the bubbles.

What I do:

* I turn the light on when I get in, and turn it off when I leave, so it's on 8/off 16.

* I feed my aquarium life every few days, but never to excess, only what they can eat

* I clean the aquarium up once a week at the minimum (sometimes twice), about 1/3rd of the gravel one week, another third the next and so on. I never clean all the gravel at once

* I do a weekly water change of about 1 gallon at the most, sometimes only half a gallon.

* I replenish (top off) evaporated water every few days

* Only when the filter starts losing water flow do I clean the white filter element, and I only clean it in dirty water-change water (see my notes below)

* I suppliment the aquarium once a week with a small dose of calcium I use Seachem's Aquavitro. This is for the snail's health, and helps balance hardness. Aquavitro Calcium is branded as a Marine (saltwater) product, but is perfect for Freshwater as well

* I suppliment the aquarium once or twice a month with plant nutrients from Flourish This is only if you're serious about lots of plants, for most, just putting the plants in is enough

* I prepare tap water before it goes in to the aquarium. The product I use is Seachem's Aquavitro Alpha. Aquavitro Alpha is branded for Marine life (reefs, saltwater, etc), but is PERFECT for freshwater. It's very concentrated. Only .5ml is needed for 15 gallons. In other words, a couple of drops for a gallon. Swish it around, and within a minute it's ready.

* I enjoy every moment of having the Chi in my office

What I don't have, notice or do:

* I never hear the Chi pump making noise unless the water gets too low (usually after a 4 day weekend).

* I don't have algae

* I've never had algea blooms all over the place covering the walls or rocks or gravel

* I don't get my hands wet when turning off the light (not sure why some people do, you just reach for the back of the switch, not the top)

* I don't have cloudy water UNLESS a mini-cycle has occured because of the poor water quality where I work, and usually only after changing too much water

* I don't frequently clean the filter or replace it--you never should...only clean it when you NEED to, and you should never HAVE to replace a filter

* I've never replaced or cleaned the black filter element

* I've never blamed the Chi's design, or Fluval, for a mistake I made

* I don't have poor water quality, my Chi is fully cycled and the bacteria eat up a bunch of the waste--the plants do the rest. The filter merely cleans out any debris.

* I haven't had to clean my white filter element in 2 or 3 months

My Aquarium Life:

* 5 Mystery snails (I breed them at home, 2 of them are over a year old and fathers to the other 3 which I brought to work)

* 2 Nerite snails

* A few pond snails

* A few Malaysian trumpet snails

Something to note, Mystery Snails poop a lot, they're basically food processors. This is why I have to clean the gravel more frequently than if I only had a small fish or Betta. Nerite, Pond and Malaysian snails have a very low bio load and are much cleaner (they poop MUCH less), so I suggest them in any combination with fish. Don't put 5 Mystery snails AND fish in a Chi. You could have one Mystery and some fish though, or several Malaysian Trumpet/Pond snails and fish.

For food, I use algae chips mostly, supplimented with some flake food. Algae chips produce less ammonia/nutrient waste as it sits in the water, compared to flake food. Flake food in any level of excess, will cause a cycle (cloud in the water) because it breaks down so much quicker. Keep that in mind.

It's sometimes good to have Malaysian Trumpet snails in any tank, or a Mystery snail. They don't eat your plants, and they're like Canaries in the sense that if something is bad in your water quality, MTS will usually run to the top of the tank to try and get out, and Mystery snails will usually curl up in their shells. So keep that in mind. Also if you have Mystery snails constantly trying to escape, you may have water quality issues.

Contrary to what you might think, my water quality is actually good. Little to no ammonia (less than .25 measurable), and the nitrates/nitrites are insignificant. This is due largely to the live plants and the gas exchange I have incorporated into the Chi. With fake plants, these inhabitants would've died shortly after being put in.

I have had my male Betta in it, but took him out because he wanted to try and jump no matter what I did and didn't feel comfy with him being there while I was away from work.

Again, something to keep in mind, I've had my Chi up and running for a year with no loss of life due to the Chi.

* USE LIVE PLANTS NOT FAKE ONES

I mention this first because it can help solve a couple of problems. For one, live plants don't cause algae.. they usually prevent it by filtering the water from excess nutrients and poison. They also look better, and your aquarium life will love you for it.

Please do the research on the right plants to put in your aquarium, because the Chi's lighting system can only support a certain amount of plants (low light level plants). You have to get low light level plants, or might be able to squeeze by with moderate light level plants as well. Also, dosing with plant nutrients from the aquarium store can help over time, but that's for another review another day. Talk to your local aquarium expert on that particular expert.

Here's plants I presently keep in my Chi which have flourished (what I mean is, they haven't died and they continue to actually grow and expand):

* Amazon Sword I started out with a little 3" plant a year ago, and right now it's reaching the cube and has bushed all the way out to cover a large portion of the center part of the Chi. It started out with only a few leaves, it now has over 20.

* Anubius Nana This is the smaller Anubius, but you could use the full size. The smaller just looks better. This has branched out a little bit over the past year, the good news is it hasn't died.

* Pennywort Good floating plant, it can be planted or left floating. Bettas and shrimp LOVE these. You can also easily cut these to whatever lenght or arrangement you desire, they branch out from both cut ends.

* Hornwort Good floating plant which can be planted or left floating. Bettas and shrimp LOVE these. You can also easily cut these to whatever lenght or arrangement you desire, they branch out from both cut ends.

* Anacharis Some call this a weed plant. It's very hardy, and can be planted or left floating. You can also easily cut these to whatever lenght or arrangement you desire, they branch out from both cut ends. Even without light these things grow.

* Italian Val This guy has streamers running all over the Chi all the way to the surface

* Banana Plants These things are neat and super hardy. Just grab a few and toss them in any tank, even without light these things grow.

One thing I suggest if you have a planted aquarium is to ensure the water surface is being constantly agitated. The Chi's filtration cube does this well, but for even greater live plant performance and healthier water for your fish, a tiny air line running in the back pushing bubbles to the surface will do nicely. It just has to flow enough to break the surface tension.

* LIDLESS AQUARIUM

The Chi is a lidless aquarium, as part of its styling...it's not meant to kill your fish on purpose! Being lidless will contribute to a little bit more water evaporation than normal if the water/air temperature is above the mid 70's. Also if you have any life which might hop out (such as an African Dwarf Frog, Betta, Snail, etc..), be aware of this fact. It's up to you to take care of them. Most dog owners wouldn't leave their gates open while the dogs are in the yard, without a collar. Don't put Betta or ADF into a lidless aquarium.

If some part of life you put in the aquarium flies out, it's not because of a poor design on Fluval's part, it's because you weren't responsible enough to manage the situation.

IF YOU WANT A LID OR NEED A LID OR EQUIVALENT, then check this out. If you absolutely needed a lid you could have one made (yourself or ask someone) out of acrylic or glass, and would cost less than $10. Or, here is a natural healthy alternative: Floating plants. Yes, floating live plants.

You could get some Hornwort or Pennywort from most aquarium stores (sometimes even free if you just ask), and let it float in the top. Pennywort covers more surface area than Hornwort, but everyone has a preference. What this does is help keep the water clean by absorbing poisonous nutrients from the water, and encourages hopping fish to stay in the water. Even if they tried hopping, enough surface plants will prevent them from getting out. Also fish enjoy natural foliage, many times you'll see a Betta just floating beneath leaves, they truly enjoy it.

For most Bettas, this will prevent them from wanting to hop out. I found that Betta personalities vary greatly. One of mine won't be tempted to jump if the surface of the water is calm, but if its rippling (as with the Chi), he'll want to hop out.

I successfully had an ADF in the aquarium by merely covering up the corners with some clear plastic or screen-door screen (he would crawl up the corners). I had a Betta who liked trying to jump out, I prevented that by lowering the water level to about 1" under the lid of the glass.

* FILTRATION ON THE CHI SUCKS, when in actuality it doesn't

The filter works just fine for the Chi as long as you don't overload the system and let the aquarium fully cycle! If you have a Chi which seems cloudy or "milky", the water isn't dirty, it's cycling. If you do a search online for 'aquarium cycling' you will find a plethora of information. Don't presume the filtration isn't working because the cloudy water is actually proof that it IS working. The best method IMO is "fishless cycling", so check that out.

Whether you cycle with or without something in the Chi, it will take about a month to fully complete the cycle. This is because the Chi is small and it's very hard to get the biological balance perfect. Slight ammonia spikes will cause a mini-cycle, so don't worry about that. Depending on your life load in the aquarium, you should be vacuuming the gravel once a week (take care not to vacuum all of it fully.. perhaps just half of it fully, then the other half the next week).

* DON'T FOLLOW THE FILTER CHANGING INSTRUCTIONS, follow these instead

This relates to cycling. Fluval would have you changing the filter very frequently, which will prolong cycling (see above) and is actually unhealthy for your inhabitants. The only filter maintenance you should ever have to do is if the water flow in the filter starts dropping drastically. At that point, remove the white filter pad and gently clean off SOME of the goop (not all) in a bucket of WATER CHANGE WATER.. the stuff you drain out of the tank during a water change. DO NOT CLEAN IT IN TAP WATER. You could also "squeeze" it rather than wiping off goo, if that's better for you.

You will never have to replace a pad for many many months, if at all, if you do this properly and the tank has fully cycled. The black sponge shouldn't ever need replacing. Right now I've had my Chi a year and have never replaced the black pad, and only replaced the white filter pad once due to me messing up a filter pad once.

If you do need to replace a pad for whatever reason, put a new one in the top of the cube and let it sit there for a few days so that the cleansing bacteria can attach itself to this new pad, and then install it.

Some people prefer to unplug the filter to clean it, I simply flip the cube over and take care of business. I then flip it back. In all, filter maintenance takes me at most 90 seconds. Remember to turn off the blinding light first. If you handle your filter in this manner, you will enjoy your Chi forever and your aquarium life will love you for it.

* BROWN GOOP ON THE CUBE IS NORMAL

This is good bacteria typically. In a properly cycled aquarium with bacteria cleaning the water for you, any area of prolonged exposure to "water fall" (thin sheets of water flowing), you will have these bacteria grow. For the health of the water, it's actually best not to clean it off. This isn't algae, this is good bacteria. If you do need to clean it off, clean the front only, or if you must, whatever side you view the most.

If you clean all of it, do NOT clean it off the backside. You want some to remain, otherwise you could have a mini-cycle as the bacteria need to "regroup" and build their life back up.

* LOUD CHI/FILTRATION NOISES ARE NOT NORMAL, it usually means you aren't properly maintaining water level

If this is your situation, your water level isn't high enough or the pump isn't primed. If your water level is actually high enough and the pump is primed, then something has gotten into the pump somehow which isn't normal. Contact Fluval if that's the case.

For average water/air temperatures in the mid 70's, if the water was originally filled to about 1/8" from the top of the lid, you can go about 3 days before water needs to be added. By the end of the 3rd day, the pump may start struggling to pump water (you'll notice the noise and gurgling). In other words, every 2 or 3 days top off your water.

Water level can be up to the edge of the lid (though in many cases I wouldn't suggest it), and as low as about 1/4" from the bottom of the filtration cube. Those are your MAX/MIN LIMITS. Do not try to operate the aquarium beyond those! Ideally you will want the water level to be filled up to about 1/4" from the top of the lid for aquarium life which does NOT JUMP, and for anything which does jump you'll want it about 1" from the top. Bear in mind this will NOT guarantee something can't escape. An African Dwarf Frog (ADF) CAN ESCAPE even if the water level is 2" below the top. You need something like a lid to keep an ADF in the Chi. The Chi isn't the best aquarium for an ADF anyhow, but that's for another review.

Once your water level drops too low, either due to evaporation or whatnot, you need to replenish it. Too low is easily identified by loud pump noises or when the pump stops pumping altogether. Also it's easily recognized as getting too close to the bottom of the cube. So let's review:

Max Water Fill: Up to the lid

Average Water Fill: 1/4-1/2" from the top of the lid

For Jumping Water life (Betta, ADF, etc): 1" from the lid + you might need a lid (or plantlife.. see my section on LIDS up above!)

Never let the water drop below the cube or close to the bottom!

* I HAVE ALGAE PROBLEMS OR POOR WATER QUALITY BECAUSE THE CHI SUCKs, which usually actually means you aren't taking proper care of the Chi

The Chi is a small volume aquarium, and with small volume comes high responsibility. Don't expect to just toss stuff in and let the filter take care of it. Let me try to explain biological balance with another type of balance:

Grab a pen or pencil and balance it on the tip of your finger, by simply laying it on there. You should find balance in the middle of the pen/pencil, and you'll probably find it very quickly. If you move your hand around you'll find it tends to keep its balance for the most part. Pretty simple isn't it? Imagine the pen/pencil, laying on its side, as a large volume of water, such as 50 or 100 gallon aquarium.

Now, take the pen or pencil and tip it up on either the writing-point or the other end, and try balancing it on the tip of your finger. You might find it's a bit harder to balance, and even the slightest movement causes it to lose stability. Imagine that as a small volume of aquarium water. This is what you have with the Chi. You have to find balance, and you don't want to lose that balance.

This relates to aquarium cycling which I mentioned earlier, you can research 'aquarium cycling' and find plenty of info.

WHY ALGAE??? Usually algae is the result of excess nutrients (typically the bad kind), enough light, lack of water circulation, excess C02, lack of filtration, or any combination. In many new aquariums (ones where the water/bacteria haven't matured), you'll quickly get brown or tan colored algae, but over time as things mature it will go away.

Greenish and blue algaes are typically because you're not doing enough to clean the water (excess feeding, not enough gravel cleaning, etc). Do a search for 'reasons for aquarium algae' and you will find plenty of information on it. Here are two VERY helpful links which explain the reasons for, and how to cure, an algae problem:By the way if you do have some algae or concern yourself with algae that could appear, here's a couple of healthy natural suggestions:

> Live plants. Yes.. they actually do not CAUSE algae, they help prevent it by sucking up the excess nutrients/poison.

> Freshwater Nerite Snails are known to mow down algae quicker than it can grow, and they're hardy creatures

Basically if you're having out of control algae, don't blame the Chi, because it's probably not the filter or the Chi or Fluval. Something else to keep in mind is water surface gas exchange. I mention this under the Live Plant section. The Chi's filtration cube does a good job of keeping the water surface moving, but the more you break the water surface the more gas exchange (C02 out of the water, Oxygen into the water) can occur. This helps prevent algae as well. A small air tube running into the back of the Chi can do wonders.

* I PUT A BUNCH OF FISHIES AND LIFE IN TH CHI AND THE CHI KILLED THEM ALL, no actually you killed them by suffocation

I hear this a lot with any aquarium, but especially the small ones. Many experienced aquarists will tell you that once an aquarium has fully cycled (and not before), you can have about 1" of adult fish per gallon. This doesn't mean 1 fish per gallon, it means 1" of surface area of the fish per gallon. This is a GENERAL rule, as some fish are cleaner (have less bio load) than others.

For example, Goldfish tend to be dirtier than a Neon Tetra. By the way, speaking of Neon Tetra, they are grouping/schooling fish meaning you'll need to have 6-12 or more of them for the fish to be happy. You can't put that many Neon Tetra in a Chi. A single Betta in a Chi will work well. Several Ghost Shrimp will work just fine (you could probably have 5-10 actually, as shrimp have a very low bio load).

I can't go over all the fish combinations, but do some research on the kind of fish you're going to put in there. Generally you won't have more than 5, or even 3. If you put too much life in there, no matter the combination, they die of suffocation in their own filth. Imagine locking yourself in the bathroom, filling the entire room halfway up with water, and living in it for a month. You wouldn't make it. If you did make it, you wouldn't want to have made it.

There's other life you can have in the aquarium also, not just fish. You can have snails for example. Mystery Snails are popular. They poop a lot, trust me on this, I have had several hundred at once (not in a Chi of course) and it's overwhelming. So you could have 1-5 Mystery Snail in a cycled Chi without an issue as long as you clean up after them (which will be every few days).

Here's what I suggest, if you want a Betta you could also put a couple of Nerite snails in there as well (Mystery Snails are great, but Betta tend to nip at the antenna). Nerite snails are like tanks, they are hardcore, very strong, their shells are like rocks, and fish can't nip at them. They also clean up algae!

I purchased the Fluval Chi aquarium for my office three months ago, and I've been pleased with it. I currently have 4 fish in the aquarium, and they're doing well. You will need to buy some additional items to make this aquarium work, so make sure you check out that part of the review. I added a picture of my aquarium to the images section.

PROS

The form factor is just right for a desktop or small table because it's more vertical than horizontal. The tank only takes about 10 square inches of space.

The overall look of the aquarium is pleasing to the eye. The shape is modern, the glass is clear, and the little water movement on the top is enjoyable without being distracting.

You don't hear the filter at all and the sound of the water is quiet and peaceful. You can control the volume of the water sounds by taking out all of the rocks on the top filter (for the most noise with a little splashing out of the aquarium) or add more rocks to reduce the sound (and splash) of the water. These rocks come with the aquarium.

CONS

Don't be scared away by the cons because they're not completely unreasonable for this size of an aquarium.

Managing PH and ammonia levels in a small tank is harder than in a larger tank because everything changes faster. That means you may have to do more frequent partial water changes on this tank than on larger ones. I tend to do water changes 1-2 times a week.

The aquarium is only 5 gallons, so you are limited in the number of fish you can/should add. The general rule of thumb is one gallon per one inch of fish.

The filter is in the box at the top. To change it you have to unplug the aquarium (no switch), take out the rock tray (drips water), and then turn the top box over to extract the filter.

The light is connected to the filter, so you can't set up a timer to turn the light on/off.

There's no lid to the aquarium, and some fish like to jump, which could result in their untimely death. When the water is at the correct height, the top of the glass is less than 1 inch away.

The constant flow of the water on top of the tank forces the food down into the aquarium too quickly when the fish are feeding. I tilt the filter box just barely in one direction so the water will be more peaceful on the side with less water flow. This helps a bit, but I still have to clean the gravel more than I should.

WHAT ELSE YOU WILL NEED

The aquarium doesn't come with everything you need to get started. You will need to purchase:

* heater

(Unless you're just getting a goldfish, you need a heater to keep the temperature consistent. A lot of the small ones are preset to 76 degrees, but I suggest you get one with an adjustable thermostat in case you get fish that prefer a different temperature. Don't put off this purchase or you may lose some fish.)

* thermometer

(You need to verify that the heater is keeping the water at the right temperature. You can get one of the ones that sticks to the outside of the tank.)

* gravel for the bottom

* plants

(Type and amount depends on what fish you pick. You will want plants between 3-7 inches. Plants should not touch the heater. You can get real plants if you want, but I didn't. The tank isn't really big enough to add plants that keep growing.)

* ornaments

(For hiding places and decoration. Depends on fish you pick, but some bottom feeders prefer to have a hiding place. The Fluval Chi pieces that they make for the middle of the aquarium are short enough to go under the filter and some have plants built into them. But you don't have to get the Fluval Chi decorations.)

* gravel vacuum

(You need a way to clean out the stuff that collects in the gravel. The cheap way is a gravel vacuum which siphons the water out. You need this for water changes.

* bucket

(Used to catch the water from the gravel vacuum. It needs to hold up to a gallon of water. Partial water changes take out around 10-20% of the water.)

* net

(To get the fish out of the pet store bag and into the aquarium and for other maintenance.)

* algae scraper

(You can wait on this one, but if all goes well algae will grow on the glass and you will need to scrape it off. I got a scraper that has a plant holder on the other end to help put plants back at the bottom when they inevitably pop up.)

* gallon jugs (2)

(You need to prepare your replacement water ahead of time. I use two jugs that used to have distilled water in them. You will need to top off the aquarium every 1-2 days as the water evaporates fairly quickly since there is no lid to the aquarium. And when you do water changes you'll need more replacement water. Having the jugs lets you treat the water in advance and lets it get to room temperature before you put it into the aquarium.)

* replacement filters and pad

(You have to replace the filters about every 2-4 weeks and the pad about every 2-3 month. This is just a recurring cost that you have to factor in to your purchase.)

* fish and fish food

(It's tempting to get the fish the day you get the aquarium, but most experts seem to suggest cycling the aquarium before adding fish. This means running the aquarium for a few weeks before you add fish so the bacteria you need in the water can start to grow before the fish start contaminating the water with their waste. If you just can't wait that long, just get 1 or 2 fish at first and add another couple later on when things get going. One exception may be if you're getting a goldfish or beta fish, which seem to be heartier than the typical tropical fish.)

OTHER TIPS

I placed my aquarium against a wall, so I ended up adding a background sheet that hid the cables and other stuff on my desk that was behind the aquarium. The dark blue metallic paper made it easier to see my fish.

I had a hard time turning the light off/on until I realized that there was a raised part of the plastic to lock the light into place when it's on. You have to move the switch away from the filter housing slightly to get it over this small piece of plastic. It's easy to do once you realize the trick, but it's hard to see it.

The box suggests the following fish for the Fluval Chi aquarium: Goldfish, Betta Splendens, Guppies, Danios. I have 3 Glofish in mine (an interesting genetically modified Danio) with an Angelica Botia (bottom feeder that I'll have to move to a bigger tank eventually) to clean up the scraps. I suggest you get one bottom feeder like a Cory to help control the food that gets to the bottom. Note that most of the cooler bottom feeders get too big for this size tank, but the Cory is okay. I don't think Betta fish really like the current created by filters. I got that advice from the internet, so you know it must be true.

I just read the other reviews and I have to say that there's no problem with the filter--it's plenty strong enough. Also, the cloudy water doesn't have anything to do with the aquarium. You have to vacuum the gravel and do the partial water changes and clean the filter as the instructions tell you. You don't need to add chemicals to clear the cloudy water--just vacuum to get the water out for the partial water changes.

CONCLUSION

I like my Fluval Chi (5 gallon) aquarium. It works well for my office. I'd highly recommend it for Glofish/Danios, Guppies, and Cories when space is very limited. If you have more space and want tropical fish, I'd go for a 20+ gallon tank so you can get more (and bigger) fish, have an easier time controlling the chemical levels of the water, and have a lid.

Buy Fluval Chi Aquarium Kit Now

The Chi is just gorgeous, it's a beautiful piece of art for a fish to live in. And when I say A fish, I mean a SINGLE fish.

There is absolutely nothing wrong with this tank other than the fact that the people typically buying it have not bothered to research that you can not jam 10 fish in a 5 gallon tank. Of course this tank's filtration system isn't powerful enough to clean water from 10 fish, it was never meant to have that many. Nor is any 5 gallon tank. The way to keep your tank clean and clear? Let it go through it's cycling process (which takes months, not weeks), don't overfeed, and please, if you want your fish to live, do not overstock your tank! The rule of thumb is for every gallon of water you have 1 inch of adult fish (in community tropical settings), and it doesn't apply to all fish. So, on average you get 5 fish for the 5 gallon tank. Make your fish even happier by allowing them to have space (so they don't stress out over territory) and only putting 1-3 in a 5 gallon. Fish usually end up dying in their own ammonia build up in an overstocked tank a great way to go, eh?

This tank is beautiful, tranquil, and perfect for a betta or 3 fancy guppies, but not much else... Like all other small tanks (and despite it's own advertising, most advertising preys on the mass' ignorance). This isn't a problem with this tank, but par for all small tanks. I HIGHLY recommend this aquarium for those with a betta. Please people, remember to research animals before you bring them into your home that way you can enjoy aquariums like these for what they have to offer.

Read Best Reviews of Fluval Chi Aquarium Kit Here

Disclaimer:

I am a novice at this. This Review is based on only six weeks experience with: 1 male betta, 1 java moss ball, one java fern, Aqueon 50-Watt heater and CaribSea Eco-Complete substrait. The tank cycled in two weeks and has stayed stable since then. I am also in no way affiliated with any websites I link to.

The Good first (naturally):

-Attractive design...if you're into this sorta thing.

-Solid enough build quality. (Still made in the Glorious Peoples Republic of China...)

-SUPER quiet! You can move rocks around to dampen the gurgling water sound. The actual filter pump is almost silent!

-Built in light is convenient. (And it's not THAT dim...)

The Not So Good: (For me at least, but maybe not for you!)

-Light in fountain stays on ALL THE TIME. (seriously trippy at night)

-Filter placement and design.

It may look nice to have that filter placed in the middle of the tank will water cascading down the sides. But, if you have a betta fish or any species that don't like current this is a HORRIBLE set up for them. The waterfall effect creates a pretty strong down current in the center of the tank, and an equally strong up current at the sides. This may be great for filtering, but our long finned friends do not appreciate it! Gromit would get taken for a ride up and down with the current and try to stuff himself into a corner behind one of the moss balls to escape.

The center mounted filter also takes up a lot of real estate, which because of the current made feeding a challenge.

I was able to move the filter to the side, but it was no longer on its clip so it could tip rather easily. This helped a little, but not much. Next I used 3/8 inch tubing to direct the outflow of water into the corner with the heater. This helped a lot but was not the most attractive thing in the world. It also meant that the water was not getting aerated at all. To fix the aeration problem I created a little venturi that was very effective, if not rather loud...

I finally gave up on the stock filter all together and picked up a Deep Blue BioMaxx Nano HOB filter from the local pet shop. It says its good to 4 gallons or less, and I could not find a single review of it online anywhere, so I was a little hesitant. I had nothing to worry about. It flows about TWICE as much water as the Chi's stock filter and produces much less current (adjustable flow and Hang on Back, not middle). It also takes regular sponge type media with lots of room for good bugs to grow.

SUMMARY:

If you really like the looks of this aquarium and don't have fish that hate current, GET IT!

If you really like the looks of the tank, maybe not so much the filter, AND have fish that DO hate current, there is still an option!

I have linked products for this second option below.

Replacement Tankhttp://www.amazon.com/Fluval-Glass-Tank-Replacement-Aquarium/dp/B005ZTZ5O2/ref=sr_1_15?ie=UTF8&qid=1363990122&sr=8-15&keywords=fluval+chi+tank

Filterhttp://www.amazon.com/Fish-Aquatic-Supplies-Biomaxx-Filter/dp/B007AA9IM4/ref=sr_1_1?s=pet-supplies&ie=UTF8&qid=1363989161&sr=1-1&keywords=deep+blue+filter

Lighthttp://www.amazon.com/Fluval-Mini-Power-Compact-Lamp/dp/B004QSV8XK/ref=sr_1_1?ie=UTF8&qid=1363990249&sr=8-1&keywords=compact+aquarium+lamp

Honestly the light is not necessary for some tanks. Bettas light low light and there are a fair share of plants that do just fine with low light.

If you plan on loading your aquarium up with a few more fish than you know it should have, get the six gallon tank and a filter rated for 10 plus gallons.

ALSO!!!!

Spend lots of time on aquarium hobby forums. There is way more (and better) information there than at you local PetSmartCo store.

And remember:

-Bigger tanks are easier to keep in the long run than smaller tanks (read nitrogen cycle).

-Don't overload your tank with life! It will die

-If you choose to cycle your tank (you should) do not change the filter media when the manufacture says to. Only change it when it completely falls apart. Read more about cycling tanks to understand why.

I hope somebody finds this helpful! I will update if my views change

Want Fluval Chi Aquarium Kit Discount?

I really like this aquarium. I have been in the hobby of fish-keeping for most of my life years. This aquarium was given to me as a present and I have had it set up with fish for a couple of weeks now. I can almost guarantee that most of the negative reviews came from people who have no experience in keeping an aquarium; and they blame their bad luck on the aquarium itself rather than their own proficiency.

If your water is cloudy (as a different reviewer was complaining)don't blame it on the filter. Yes, the filter is weak but you cannot rely on the filter to keep your water clean. You probably forgot to rinse the gravel, or you are overfeeding, or you are not doing weekly 30% water changes.

I have two fantailed goldfish in it because I didn't want to put an ugly heater in it. Keep that in mind while buying this aquarium. Most tropical fish require a water temperature of at least 72 degrees F. So if your house gets colder than that then you are going to need a heater for those tropical fish. Goldfish can withstand very cold temps so it's not an issue.

Other people complained about always needing to top it off. Yes, water does eventually evaporate but if you top it off while doing your WEEKLY water changes, it will be fine.

Another creative aquarium from Fluval!

Save 17% Off

KollerCraft AQUARIUS AquaView 360 Aquarium Kit with LED Light - 2-Gallon

KollerCraft AQUARIUS AquaView 360 Aquarium Kit with LED Light - 2-GallonI really like this little tank. I've just finished setting it up and haven't any fish in it yet, but the tank itself is a little beauty! The lid is easy to remove if you put you finger back behind where the little cut-out for the air hose goes. However there is a little hole at the front of the lid that I think I can drop food in when I feed my little critters so I won't have to be removing the lid that much. I removed one of the perforated areas in the back of the lid (there are two of them) so the top of the little 25w heater can poke out. The color variations are a delight and I'm really pleased I went ahead and purchased this.

EDIT!!!! My tank has been set up now for almost a week. My beta is in there and happy, but, please do not buy this tank. The other reviews that mentioned the faulty light are correct. The light is now shorting out! There is water in the light. The light changes color on it's own, then the light will totally shut off, then back on, then different colors, then off again. Finally I just took the light out and will buy a new tank.

Please note, Amazon was great and tried to help with this situation. They offered a replacement, but I don't want the same tank. They offered a refund if I send the tank back, they have tried in every way possible to rectify this situation, so again, I'm happy I shop on Amazon. But please do not buy this tank, I believe it's dangerous. Water and electricity do not mix well!

The tank is just as advertised. My betta LOVES it! In his half gallon enclosure he was just sitting at the bottom all the time with his fins folded up. In this one, he's always on the move and strutting his stuff. Its really nice to look at and the different lighting modes are neat too. There's no filter so keep an eye on ammonia levels!

UPDATE: I am sorry to say I have to downgrade my initial review. I originally gave this 5 stars but now I cannot. The hood light is the worst design I have ever seen. Its is not remotely waterproof and after 2 months, not only did the nuts and bolts which hold it together rust and break apart, but water can easily get inside, just from minor spatting from the air bubbler. I noticed that the lights were flickering, so I took a look. The unit practically fell apart in my hand due to corroded bolts. There was water inside the bulb assembly. No gaskets or sealed electronics of any sort. Portions of the printed circuit board had its insulation burned away due to arcing. Being somewhat savvy, I was able to repair it, but then had to put a clear plastic condom over it to keep it dry. Just a terrible design.

Buy KollerCraft AQUARIUS AquaView 360 Aquarium Kit with LED Light - 2-Gallon Now

I just want to share my method for keeping water out of the light. Use petroleum jelly on the seams of the plastic part of the light exposed to water. It's not an accident your lights start to do wierd things. water will get in there if you dont waterproof it. I have a three gallon and a two gallon on the way. They are cool little tanks.

Read Best Reviews of KollerCraft AQUARIUS AquaView 360 Aquarium Kit with LED Light - 2-Gallon Here

Although the description would lead you to believe it is filtered, it is NOT and I may have killed my betta because I thought it was. The air pump does create a suction that pulls debris under the undergravel plate so it looks clean. The problem is that all that left over food and poop sit there, trapped under the aquarium bottom plate, polluting the water and increasing the nitrates to toxic levels. You can't suction it out easily, you have to pull everything out of the aquarium to do a full weekly water change. I didn't realize this until my fish very suddenly developed fin rot for no apparent reason. I had been doing 25% water changes biweekly but apparently I wasn't even touching the debris that had collected. Now, in trying to treat the fin rot by doing 100% daily water changes, I might have killed my fish by damaging his swim bladder trying to net him in this tank. It is round, which means a square net will not form to the sides to easily net the fish without damage or over-stressing him. It takes a lot of work to net him.

The tank looks cool and we read all reviews before purchasing but thought we would try it anyway. As mentioned in most every review, within the first week there was condensation on the inside of the lighting tube so it was only a matter of time before it shorted out. One review mentioned putting petroleum jelly on the seams of the light, so I dried out the light and did this. It seems to work wonders for keeping condensation out, but I've found that it needs to be wiped down and redone every few weeks.

Another problem is that the tank scratches really easily. After the first full water change, when I pulled everything out, there were scratches everywhere from smooth rounded marbles and paper towel.

Something else to consider if you have a betta, the current from the bubbler is really strong. I had to not only buy a valve for the air hose but also stuff a piece of aquarium sponge down the center tube to keep a somewhat smooth breathing surface for him. If we keep this tank, we are leaving the bottom plate and center tube and bubbler out of it. I will try to find a true filter to fit the inside to keep the water clean. It would be a neat tank if they fix some of the major problems, but there is no excuse for leading people to believe it's filtered. Knowing what I now know, I would not purchase it again.

Want KollerCraft AQUARIUS AquaView 360 Aquarium Kit with LED Light - 2-Gallon Discount?

Received this quickly and in good shape with a very reasonable price list for replacement parts.

Save 30% Off

Petco Black Aquarium Sand, 20 lbs.

Petco Black Aquarium Sand, 20 lbs.I have now bought 7 total bags from the actual store and thought id share some words of wisdom. COMPLETLY DISREGARD ANY CLEANING INSTRUCTIONS ON OR NEAR THIS PRODUCT! The best way to clean the sand is in a 5 gallon bucket. Stick a hose in the bottom and let it overflow the bucket pushing all the little particles out. You absolutely have to agitate the gravel while in the bucket.

When adding to a tank there is 2 options.

1) Add it before the water and have lots of it floating at the top. (The air bubbles collect on it and make the little pieces float to the top)This happened with my first experience

2) Add it to a tank that already has water in it and or fish. When you do add it make sure to get a little bit in a container(Tupperware works best) and then slowly fill the container with water in your tank and then bring it to the bottom of the tank and pour like you would a carbonated beverage(SLOWLY) on the bottom. (This works the best for me)

I really do like this product; however ease of use and lack of good directions knocked it down a notch for me.

Love the look of it in the tank. I do not have bottom feeders, so nothing stirs it up, which I have heard can be a problem. Just did a water change and the suction didn't seem to bother it either. I highly recommend.

Buy Petco Black Aquarium Sand, 20 lbs. Now

This sand looks really nice in my tank but I'm glad that I didn't have any fish in there when I added this. I rinsed and rinsed it and then it took a couple of days for my tank to clear up. Then, I had to change out everything in the filter (everything was black inside of the filter + plastic cups of water from the tank left a black residue in the cup after I dumped the water out of it). After all of that, its fine but I just think that was way too much work for sand, in my opinion.

Read Best Reviews of Petco Black Aquarium Sand, 20 lbs. Here

Some reviews state that there are sand particles that float when you put the sand in..Well, yeah, air can get stuck to some sand particles and float them to the top. Just hit the particles that are floating, to knock the air off so the sand sinks back down, or get a net and scoop them out.. Not hard.

The sand is not as fine as beach sand, which I LOVE. My cichlids do not stir it up every time they play in it. Neither do my plecos and one is over a ft long. The picture makes it look like the grains are big. They are not at all. I went to petco in person and bought this (Same price.) My fish play in this more than they ever did my gravel, or my old white sand. It does not make your tank cloudy AT ALL when it is stirred up. The color is very black and makes my red jewels red color pop. I want to make all my non planted tanks have this sand as their substrate.

Want Petco Black Aquarium Sand, 20 lbs. Discount?

I bought this sand, along with two bags of the PETCO black gravel, for a 46 gallon freshwater tank. This was the first time using sand in an aquarium and I made some beginner mistakes. I did as many suggested, placing a quantity of sand in a bucket and then rinsing it outdoors to remove any sand or lighter particles. So far so good. I then dumped the sand into the empty tank and repeated until both bags of sand were in the tank. Being excited, I treated some water and filled the tank to the top by pouring the water straight into the tank. Big mistake!

I ended up with a very cloudy tank and a large layer of sand floating at the top of the water. The bottom of the tank was filled with what looked like pebbles, but upon closer inspection turned out to be air bubbles with a bunch of sand clumped around it. Anytime I touched the bottom of the tank, a host of bubbles and sand would float to the top. I waited several days but the floating layer of sand and the bubbles at the bottom remained. After some on-line research, I emptied about a third of the tank, then proceeded to slowly kneed the sand by hand, releasing all the air trapped in the sand, both on the top of the sand and buried under it. Once this was done, I knocked all the sand off the top of the water using a flat stick.

In the end, this turned out to be a good purchase. The black sand contrasts nicely with my fish and a few well placed rocks. Overall I was pleased with this purchase.

Save 15% Off

Easy Catch 6 Inch Net Extra Long Handle Ideal For All Aquarium Applications 4 Pack

Easy Catch 6 Inch Net Extra Long Handle Ideal For All Aquarium Applications 4 PackI bought these fine mesh nets for handling small fry and tiny shrimps, but the deep pocket is indeed VERY deep almost 3" deep. For larger nets this depth isn't a problem, but a definite problem for a tiny shrimp or fry net because it's difficult to get them back out once netted. Folding the net inside-out adds risk of crushing or damaging the fragile tiny shrimps or fry and trying to wash them out takes extra effort due to the deep pocket.

So, unless you have a particular need for deep pocket, look elsewhere. I'm now back to using the trusty Tetra shrimp nets.

NOT recommended.

Zilla 11667 Fresh Air Screen Cover with Center Hinge, 13-Inch by 48-Inch

Zilla 11667 Fresh Air Screen Cover with Center Hinge, 13-Inch by 48-InchScreen works great for my bearded dragon. the exact measurement of lid is 48.5 x 13.5. the didnt make that very clear in description. Someone said the middle was plastic and paint flaked off from heat but i have no such problems. Its all metal and no paint loss yet!

This is a good basic item, just the type we needed, and reasonably priced. The only problem we have is that the center support is plastic, and our light hood has a fixture at the same place. It melts the center support piece.

Buy Zilla 11667 Fresh Air Screen Cover with Center Hinge, 13-Inch by 48-Inch Now

This cover was used for our 55 gallon fish tank since we were unable to find an actual tank top to fit the deminsions. The hing allowed the back part to rest on top of the filters and still able to protect the fish from the curious cats. Very sturdy product and cleans up well each month.

Read Best Reviews of Zilla 11667 Fresh Air Screen Cover with Center Hinge, 13-Inch by 48-Inch Here

I was concerned when buying this that it would come in in bad shape like the other reviews say, but it did not. It was in very good shape, does not feel cheap & works perfect for my 55 gallon tank! The fact that it opens makes it alot easier to feed our turtle now! I would recommend this top!

Want Zilla 11667 Fresh Air Screen Cover with Center Hinge, 13-Inch by 48-Inch Discount?

Nice hinged screen cover. Makes care and feeding an easy task. Good quality product. Fit is perfect for 55 gallon tank. Excellent price too.

Save 6% Off

Penn Plax Cascade 1500 Canister Aquarium Filter CCF5UL

Penn Plax Cascade 1500 Canister Aquarium Filter CCF5ULI have multi tanks in my home and my 150 gal is hard to reach bottom

so installing this makes it easy to leave a hi-flo unit inplace 24/7 to keep tank free

and the valve for flo let's you hook-up floor vac and deep clean gravle

Save 17% Off

Zoo Med Floating Betta Log

Zoo Med Floating Betta LogMy little crowntail Jack has been in love with his Betta Log "house" for 5 months now. It fit perfectly in the corner of his 5 gallon tank. It was his FAVORITE place to hang out! Just a few days ago I noticed he had torn a hole in his fin. Immediately I went to do the nylon test on all his little toys, plants, and hideaways. (This involves dragging a pair of nylons over the items. Anything it snags on can also tear a betta fin. All his toys pass this test before I put them in) His log snagged all over the place, horribly! I have no doubt it is what tore his fin.

It looks like after a few months, his log started to wear away. I noticed color loss to reveal the grey beneath, and didn't worry too much. I just washed his toy and stuck it back in. I wish I had checked with nylon again! Make sure to check and make sure there are no sharp edges every few weeks. Unfortunately I had no luck sanding down the sharp spots.

Jack loved his toy while it lasted, and I would recommend it to other betta users. HOWEVER, make sure it isn't sharp so your little fishy friend doesn't get any injuries.

My blue super delta tail Ramses is a tail biter. I have been trying to pinpoint the cause of his tailbiting. I recently bought the floating betta log with hopes that it was boredom that was causing my baby to bite his fins (it was not). I have to admit it took Ramses awhile to figure out that his log is for his amusement and to give him a place to feel safe and secure. He loves to swim through his log. Bettas love to swim through things. I recently caught him resting in his log with part of his caudal fin sticking out which was too cute. I should note that I have Ramses in a large Kritter Keeper which is approximately 3 gallons, perfect for his floating log. To keep it from moving all over the place, his log is wedged between some fake plants which he has easy access to swim in and out of. I have heard that the paint chips off the log after awhile so I am going to watch mine very carefully and suggest to people to do the same to be safe than sorry. Overall I think it was well worth the money I spent on my boy Ramses.

Buy Zoo Med Floating Betta Log Now

This is great for Bettas. All mine love the log and enjoy swimming in it and resting in it. The only bad thing about the log is that it chips off easily. I've had mine since June and it's already had it's share of wear and tare. It's a great product though, one that I'd recommend, but for the price and how badly it lasts, not something for the long haul.

Read Best Reviews of Zoo Med Floating Betta Log Here

After eyeing this item on Amazon for a couple months, I was pleasantly surprised to find it available at my local Petsmart! Hooray!

I have my betta fish in a Marineland Eclipse 2.5 gallon tank. I only had a small plant (with a couple leaves) in there for a decoration, but realized the gentle current of the pump was still too strong for my betta. So, I was on the hunt for tank decorations. Because this tank is longer vertically than horizontally, there isn't alot of surface area of water at the top.

However, the betta log still has just enough space to float around. A little cramped, but still OK. So, you should only buy this betta log if you have a horizontal tank or a 2.5 gallon or larger tank. Definitely check the measurements of the betta log and the opening of your tank to see if you can squeeze it in passively into the tank. If it is too cramped, I'm afraid that the log could drift and pin the betta against the wall of the tank!

My betta loves it this product. He isn't always hanging out inside, but he enjoys being in there sometimes. The log is also helpful because it significantly slows the water current from the pump, allowing my fish to hover more easily at the top without being hassled.

Check out the photo I took!

Want Zoo Med Floating Betta Log Discount?

THIS IS PERFECT FOR THE BETTA I HAVE IN A 5 GALLON AQUARIUM. HE SWIMS THROUGH IT ALL OF THE TIME. HOWEVER, I DO THINK IT WOULD BE TOO LARGE FOR ANY SMALLER TANKS.

Save 16% Off

Pennplax Double Back Aquarium Background Flat, 20/29-Gallon

Pennplax Double Back Aquarium Background Flat, 20/29-GallonThis really brightened up my 20 gallon fish tank, fits perfectly, received product as advertised in a very short time. I'm very happy with it.

This vinyl pic for my 20 gal. Aquarium is quite pretty, but, I had to cut it to fit the back of my aquarium. It's okay though. I have come to believe that somehow everything that you purchase has to be adjusted to work right!

Buy Pennplax Double Back Aquarium Background Flat, 20/29-Gallon Now

10 - 20 Gallon Fish Tank Power Filter

10 - 20 Gallon Fish Tank Power FilterWhen I first got the filter it had a hole in the container part. I Email the company and they shipped other one back. This project is easy to use and costumer services is great.

I bought this for a turtle tank. Filter works well but runs a little loud, it's good for the price.

Buy 10 - 20 Gallon Fish Tank Power Filter Now

Marineland PC-ml160 Multi-stage Canister Filter

Marineland PC-ml360 Multi-stage Canister Filter- 55 to 100-Gallon, 360GPHI traded up to the C-360 after using the 350 Magnum for 7 years.

The C-360 is a great canister filter, if you pay attention to directions and use some common sense.

Keep in mind that this is a professional series filter its not for the average hobbyist who will pull it out of the box, hook it up (without understanding instruction), and watch the pretty fish swim by.

Here is what I found -

1). The filter weighs 23lbs empty it holds 2.5 gallons of water at 8.5lbs per gallon. When full of media and water, this filter weighs 45lbs. Not something you want to move around a lot.

2). Since I considered myself a semi-pro fish keeper I hooked the filter up without reading or understanding the instructions A Big Mistake. Micro-bubbles and leaking like you wouldn't believe.

3). Take the time to inventory what is in the box and understand the components.

4). Per the instructions, keep the hoses to a minimum length. A straight shot from the canister to tank is best. (I found this vital to eliminating micro-bubbles).

5). When hooking the hoses to the canister mechanism, DO NOT hand tight only. You will need to use a wrench to completely tighten. Caution do not over tighten or plastic will crack. (this step is vital to eliminating micro-bubbles)

6). Make sure the canister is full of water prior to priming. Instruction say 2 pushes of the prime button ignore this and plan on 10-15 pushes with some wait time in between.

7). Placement of the media baskets in the canister is CRITICAL. Make sure the top cylinder of each tray has the rubber gasket on (these fall off easily).

8). Place the bottom basket in the canister, next one on top. Critical that you stick your finger down the hole to make sure the 2nd tray is seated on the 1st. Repeat for all trays. Make sure they snap together.

9). Make sure to keep the rubber ring (gasket) on the top lid lubricated. I used small amounts of vaseline it works great.

10). On 1st set up you can expect micro-bubble for the first few hours. You can wait it out, or slightly tip the canister to a side to remove faster. If bubbles prolong check that your hoses are tightly connected. No hand tightening. Check that you have the shortest possible hose run and that it is not obstructed.

11). I would highly recommend this filter to anyone who want to pay attention to detail, and set it up correctly. Leaking and Micro-bubbles are for those who don't understand how the filter works.

I am not sure why other's have reviewed this filter with "micro-bubbles". I have been using my C360 for a 60-Gallon tank and have been nothing but delighted. It does take some patience setting each tray appropriately on each of the previous tray placements, but the unit is difficult to snap the top on if all trays aren't set propery. To me, this is a self evident tip, I haven't done something right... Not a problem with the unit itself. Other than a few drops of water when I remove the tubing head, there is no mess at all around the aquarium. Very easy to use, very efficient, and very quiet...

A great filter... I am buying two more for my soon to be aquired 125 Gallon...

Buy Marineland PC-ml160 Multi-stage Canister Filter Now

I am a noobie when it comes to Aquariums...however, the new home I purchased had an outdoor Koi pond, which was not deep enough to keep them out during the winter (in the Northeast). I went and purchased a 125 Gallon tank and the C-360...it is very easy to use, and when you need to clean it, just turn a knob, pull out the hoses and take the filter away without spilling but maybe a drop of water...clean it, flush it and connect it and you are back and running...VERY easy...my water looks clear and clean with 12 Koi! :)

Read Best Reviews of Marineland PC-ml160 Multi-stage Canister Filter Here

The reviews left by others had stopped me from buying the ML360 canister filter.

I was trying similar products with better reviews that ended up not working for my set up.

Fluval 306 too loud for me.

Aquastop Canister too loud, impeller rattle, not enough room for the media I liked to use. The UV Sterilizer is a plus!

As a last resort I purchased the ML360. After 1 week of running this filter I have no complaints, yet.

I wanted something that was quiet. A low hum was ok, I just didn't wan't to hear the filter when I was reading or trying to fall asleep.

I love the sturdiness of this filter, everything seems to be of good quality plastic,nothing is cheap, thin, or mediocre. Clamps snap on firmly.

The vinyl tubing has a 3/4" inner diameter and 1" outer diameter and its tough to manage, but not impossible. A few cuts and adjustments does the trick.

I was having a hell of a time keeping the intake U-tube in place while adjusting the heavy hosing. I ended up using a 90* elbow to get to the filter to prevent any kinks.

I didn't like the media that the filter came with. I use SeaChem's media (bottom to top) Carbon Matrix, PhosGuard, Purigel, Matrix, and ML Polishing Pad included with the filter.

Water flow is great, i'm using am in-line 10 Watt UV sterilizer on the return line and the water pressure hasn't gone down at all.

The water exhaust nozzle has a vent adjustment so you can aim to different streams of water, very useful. I have one disturbing the surface tension on the tank and one going down and towards the far side of the tank.

What you will like: It is quiet, NOT silent, you can hear a low hum, but it doesn't over power a quiet room. (Bedroom in my case)

What you should consider: Take an hour out of your schedule to get the tubing just right. I suggest getting some 3/4" 90* elbows if your aquarium stand has a small opening for hoses and cables. I 'd spend the extra $40 and get your own media.

Side Note: Media of good quality that will mitigate water changes and keep the aquarium crystal clear. I find SeaChem good for this. The 4 years i've been keeping fish I find that SeaChem products are the best, never had issues with Ammonia, Phosphates, Silicates and Nitrates stay around 10ppm. I usually do a 30% water change every month. Media change/re-charge every 4 5 months.

Good luck finding what you're looking for. Hope I helped you in some way.

Want Marineland PC-ml160 Multi-stage Canister Filter Discount?

Easy to get hooked up and even the filter media is included. Runs quietly and has resulted in my 55 gallon aquarium having the cleanest water I have ever had. Very impressive. Well worth the money!

Save 71% Off

Zoo Med Repti Temperature Rheostat

Zoo Med Repti Temperature RheostatI am using this for a purpose which probably voids the warranty, but works well. It adjusts my crafting (wood) burner so that it is cool enough to work with wax.

Perfect.

I picked up this product with the idea of controlling the temperatures in my ball pythons enclosure but even on this rheostat's lowest setting it was still way to hot. If this is used in conjunction with an under tank heated save yourself the money and just get a plug in lamp dimmer for home depot.

Buy Zoo Med Repti Temperature Rheostat Now

This thing even at its lowest setting remains way too hot. Your reptile can suffer severe burns that result in illness, death and unneeded veterinary bills. I'd agree with the other reviewer. Avoid this product.

Read Best Reviews of Zoo Med Repti Temperature Rheostat Here

this product keeps the under tank heater and lamp at a good warm for summer and can be turned to a hotter temp. for winter. I LOVE IT. only thing is that it took some wiggles to get the plugs in.

Want Zoo Med Repti Temperature Rheostat Discount?

I guess I didnt do enough research on this and thought it was something else. Basically its just a light dimmer and doesnt really dim that much. Not even using it right now since the lamp is on full blast anyways because its so cold in NY. But I will probably use it in the summer time and have it on the lowest setting so my turtle doesnt overheat. I kinda wish it would be a bigger difference from high to low, but its okay.