Showing posts with label fish tanks australia. Show all posts
Showing posts with label fish tanks australia. Show all posts

Aquatic Life Light T5 HO 2-Lamp Link Fresh Aquarium Light, 30-Inch

Aquatic Life Light T5 HO 2-Lamp Link Fresh Aquarium Light, 30-InchI bought this lamp for a 26 gallon tank that I have been having difficulty keeping plants flourishing in. The difference in output is spectacular. The products requires a minor amount of labor to setup (a dozen or so screws). Overall it seems well designed and of excellent quality.

The only reason it gets 4 stars instead of 5 is because of the mounting system aesthetics. Because it is not enclosed in a hood, it can draw attention away from the tank itself.

Very nice fixture for my 29 gallon planted tank. Housing is actually made of metal! Only down fall are 24inch bulbs in a 30inch light.

Buy Aquatic Life Light T5 HO 2-Lamp Link Fresh Aquarium Light, 30-Inch Now

I bought this for my 20 gallon long planted tank. It is a great light fixture. I was tempted to buy the cheaper T5HO fixtures they sell at the big box stores, but this was well worth the money. Very bright and easy setup.

Read Best Reviews of Aquatic Life Light T5 HO 2-Lamp Link Fresh Aquarium Light, 30-Inch Here

Bought 2 of these to go over a 36 gallon bowfront planted freshwater aquarium. Plants look great. Both units connected together and look sharp

Want Aquatic Life Light T5 HO 2-Lamp Link Fresh Aquarium Light, 30-Inch Discount?

Finnex External Refugium/Breeder Hang-On Box/Air Pump and Air Tubes, 1-Gallon

Finnex External Refugium/Breeder Hang-On Box/Air Pump and Air Tubes, 1-Gallonfound one at the local lfs for 16 bucks from Marina. looks exactley the same. this one does not come with a pump you will find another use for pump if you buy this one though. i did the opposite instead of going with an air pump I rigged a rio 50 pump. this is a great product all together and flows nicely into my 7.5g cube.

using the rio pump to push water into the refugium works great. granted the flow in the tank itself is poor. after many adaptations and trials, I took the air pump and simply added a control valve piece to it and wedged it between the pump and corners of tank. this allows the rio 50 to pick up a little oxygen, if set slightly below or next to it to flow into the refugium. it also causes the surface of the water to break allowing for important oxygen and carbon exchanges as well as keeping the surface clean and preventing buildup on the surface as well. the airstone with pump also causes a slight flow so water circulates is better without buying another pump. Even the smallest circulation pumps in a 7.5g or less causes a massive current. i currently have a lionfish with a few corals in it. he is currently eating the copepods and Amphipods that are in the live rock and coming out of the refugium.

You will need to go to the local lfs or hardware store for an inch long tube to connect the pump to the pipe that runs into the refugium. Also as far as noise and/or water flowing out of the back of the refugium here is a couple suggestions. Take an airline tube and slide it into the pipe just to where it makes its way out of the u bend in the pipe. So about an inch and a half to 2 inches into the pipe. point the tube that is sticking into the refugium down to the bottom. this allows the water NOT to be forced up the sides and out the back. you may also go and just buy the correct tubing to fit over the pipe and point down as well. Also on the gate where the water exits which should come with it. cut out one of the middle bars slide it back in place. I set the gate in so thaat it set where the 2nd bar from the bottom / 3rd bar from top is missing. this will take care of the overflow as well as making sure the feet on refugium are on.

great product and must have. for small tanks.

saves the piping and you can see the refugiums, recomended for a not so heavy bio load though. i keep my extra fish in there and some light coral

Buy Finnex External Refugium/Breeder Hang-On Box/Air Pump and Air Tubes, 1-Gallon Now

Using it as a refugium off my sump. I have one of the outputs of the protein skimmer dump into it.

I also added the Finnex Might Ray LED, and that is plenty bright to light the box.

Read Best Reviews of Finnex External Refugium/Breeder Hang-On Box/Air Pump and Air Tubes, 1-Gallon Here

The airpump set up didn't move much water through it and made alot of noise so I hooked it to a power head. I had to drill some holes to allow a little extra overflow back into the tank. For the money it works great, I have a mangrove plant growing in it.

Want Finnex External Refugium/Breeder Hang-On Box/Air Pump and Air Tubes, 1-Gallon Discount?

I purchased this directly from finnex and have it on the back of a 7.5 gallon Mr aqua low iron reef cube. It fits the back of the tank barely. Water volume is around 1 gallon. If you plan on storing any equipment in this small fuge then the top almost has to be removed as their is no cord room. The fuge fills up almost entirely with hardly any room left. A little shake to the tank causes a slight overflow. The fuge is built so that any overflow will occur forward back into the aquarium. This is done by the back being higher then the front by fractions of inches. I scrapped the air pump and use a hydor pico 180 gph pump. It works perfectly and I get a nice little stream through the fuge with the pump toned back all the way. Full out the fuge overflows, but the flow is much better. Definitely recommend the pico pump if you go with this as a fuge; otherwise the noise will make you purchase one anyway.

Save 8% Off

Jardin Soft Plastic Airline Tube 10-Piece Suction Cup Holders for Aquarium, Clear

Jardin Soft Plastic Airline Tube 10-Piece Suction Cup Holders for Aquarium, ClearThese are the best valves I have found ever. These have a vary fine range of tuning and do not leak or bleed. I am even using a few for pressurized water applications.

Hikari Usa AHK72337 Ultimate Water Conditioner for Aquarium, 0.5-Gallon

Hikari Usa AHK72337 Ultimate Water Conditioner for Aquarium, 0.5-GallonI have recived this prodoct before it helps the Whole fish tank keep clean in every way .This is the second time ive bought it and i will keep buying it Because it works fast .keeps the fish healthy and the water stays Clear .

thanks .Ray

Save 32% Off

Jardin LCD Screen Display Digital Thermometer Probe with 39.4-Inch Cable

Jardin LCD Screen Display Digital Thermometer Probe with 39.4-Inch CableShe is always falling over in the tank with any movement at all. She gets lost in our 55gallon tank.

Don't buy it it was broke when we got it and the piece was no where to be found so it was broke when they shipped it!!! its so small you can barely see it in the tank :(

Buy Jardin LCD Screen Display Digital Thermometer Probe with 39.4-Inch Cable Now

Daily Double II Feeder - 3 1/2 in. x 3 1/2 in. x 4 in.

Daily Double II Feeder - 3 1/2 in. x 3 1/2 in. x 4 in.I thought this would be the solution to leaving my fish alone for a week. I tested the feeder for a week prior to leaving for vacation. Seeing that it worked properly I placed the feeder over the opening in my tank and left for vacation. The moisture that evaporates from the tank got into the feeder and made the flake food wet and unable to fall out the tube. Unfortunately all my fish died and I now know the reason no one has ever recommended this product to me before.

I bought this product because it is battery powered and inexpensive. Unfortunately, it required some tweaks before it became useful.

For the first month I used it exactly as intended with the uniformly small, round fish flakes. It has a basic quartz clock mechanism surrounded by plastic. This is the same clock mechanism that is used in do it yourself clock kits....quartz and made in Japan with a single AA battery. So it goes around once every 12 hours.

It suffers from one major problem...water moisture. When it is pointing down for roughly 4 out of the 12 hours, its orange tube consumes the water vapor that evaporates from the fish tank. The water is then channeled into the fish food where it builds up. After the first two weeks, the food was extra moist. By the third week the food was molding quickly. I repositioned it over the driest spot I could find and the mold began to proliferate after 4 weeks. Because the plastic unit is not sealed around the embedded square clock module, moisture had also seeped deep inside the mechanism, discovered when I went to check the battery.

I made two simple modifications that made this work like a charm:

(1) Open the black plastic housing that surrounds the clock module and seal the module with a bead of caulk. This will seal out the water from the module.

(2) Drill about 16 1/8th inch holes in the clear plastic cover, being careful not to drill through the orange tube. This will provide the necessary aeration to keep the food dry.

I've had it running now for over 6 months and the food is dry and the fish are happy. The manufacturer could have made these modifications for about 5 cents. Maybe they'll read this and improve their product.

One last note, be careful about removing the plastic lid to refill the food. The lid is held on by small plastic tabs that can easily break. Mine are still intact, but I'm extra careful.

Buy Daily Double II Feeder - 3 1/2 in. x 3 1/2 in. x 4 in. Now

I have had one of these for over a year and my fish are thriving! This is a classroom tank and is even left for weeks at a time over the summer; the feeder has never failed me. I do leave the lid of the tank as closed as possible without interfering with the feeder to avoid moisture in the feeder. I am actually visiting this sit right now to buy another feeder to attach to a send, new tank for my classroom.

Read Best Reviews of Daily Double II Feeder - 3 1/2 in. x 3 1/2 in. x 4 in. Here

I bought this for $11 and have been testing it for a week. The battery compartment is hopeless almost had to force the batteries in (and I did check to make sure I used the correct batteries). There is a tube inside the rotating drum which is probably driven by a typical clock mechanism. The tube has a cut-out that catches the fish food when it is at the 6 o'clock position and as it rotates to the 12 o'clock position, the food falls out of the other end of the tube into the water. This cut-out is far too small for typical flake food or 1/4" pellets. I had to chop the flakes into small bits so that the cut-out will collect the right amount of food.

Having done that I filled the drum with about a quarter full of food and put it the battery. Well, I hear ticking and put a tiny stick at the top of the drum to see if it actually rotates. Next morning, the stick is still there. Dead battery?? I try again with a brand new battery and hear ticking before I go away my marker is still there next morning.

I suppose the clock might be working but the mechanism that drives the drum is kaput.

Want Daily Double II Feeder - 3 1/2 in. x 3 1/2 in. x 4 in. Discount?

I bought my feeder a week before my week-long trip home to visit my family (I am a college student living in an apartment). I followed the instructions and planned on testing it for a week to make sure it would work before my trip. It worked one time (as in one feeding), and then stopped turning and clicking completely. Having limited access to transportation, and any additional funds for that matter, I was unable to buy another feeder and had to beg a friend to come over and feed my fish for 7 days straight.

Not only that, but I looked for a phone number on the packaging/instructions to call and take advantage of the warranty only (surprise, surprise) to find one not listed anywhere on the packaging/instructions. After finding the Penn Plex website, I called the customer service line. Evidently no one works there, as after 45 minutes I still was not able to speak to anyone. Apparently they just expect you to pay for shipping and send it back to them without any contact whatsoever.

Not only do I suggest never buying this product, but I suggest never buying any Penn Plex product as they apparently neither invest time in the quality of their product or their customer service. I bought a slightly more expensive feeder later that I have had no problems with and has more features, don't waste your time with this thing.

Azoo Mignon Filter 150 Power Filter

Azoo Mignon Filter 150 Power FilterI've been running the Azoo Mignon filter in my fish tank for about two months now and it runs like a champ. It is very quiet (unless the water level in the tank drops, and then I just need to refresh the water levels--no fault of the filter) and seems to do a very good job keeping the tank clean. I have been using it on a smaller 5-gallon tank and I turned the flow down some so the water isn't so turbulent. My goldfish (the only occupant in my tank) seems to like it and I see him hanging out occasionally around the spillway--he seems to like the slight briskness of the flow. I would highly recommend it. I'm sure it would do a fine job in a larger tank too.

I bought this filter from Amazon as an upgrade to the Azoo Mignon 60 I used to cycle my aquarium.

I have a small 5.5 gallon aquarium with live plants, driftwood, and Flourite substrate. Tank inhabitants are a single male betta, 2 apple snails, an algae eater and 5 glass shrimp. This filter is very small, but does a great job cycling the water enough to keep the tank nice and clear. I felt the original Azoo Mignon 60 was right at its limit in how much water it could turn over in a 5.5 gallon tank.

The only modifications I made to this new Azoo 150 were to remove the sponge and carbon it came with and replace them with BioMax and AquaClear foam inserts (both available through Amazon). I dropped a small mesh bag with about 12 biomax pellets and cut the new AquaClear foam insert to fit tightly into the top portion of the tank. The AquaClear (sponge) is taller than the flow of water (if that makes sense). So that all water that comes through the filter passes through the sponge and the biomax at the bottom cultures my healthy bacteria.

The filter is very quiet and has an easily adjusted flow knob so that I can turn the flow down when feeding and back up after and even to full blast if I have disturbed the substrate when moving plants around. I think it is an incredible deal for the price. I was also really impressed with how small it is. I wanted to make sure that whatever power filter I used didn't look like a monster hanging off the back of a small 5.5 gallon tank.

Overall it does the job, looks really nice and is cheap enough to buy a replacement if needed.

Buy Azoo Mignon Filter 150 Power Filter Now

My 2 marina filter that was more expensive than this filter couldn't match up be warned however this is small.

Read Best Reviews of Azoo Mignon Filter 150 Power Filter Here

I bought this little filter in my local fish store for my 5.5 gallon Aqueon tank.

The carbon filtration seems to work perfectly. I installed it right after a week long Melafix treatment for one of my guppies (this is my nursery/hospital tank) so the water was very cloudy. In 12 hours, there was a substantial change in the cloudiness. In 24 hours, the water was nearly clear. By 48 hours, the tank was sparkling clean. This works perfectly for a 5.5 gallon tank.

Now for the chemical filtration, included in the package is one set of the carbon filter cartridge, and a thin black sponge "for mechanical filtration." Indeed the media in the thin black sponge was thin and spacious; there is less surface area in the sponge than optimal. Afraid that I did not have enough surface area for beneficial bacteria to grow on (truly not an issue), I purchased a pack of replacement sponges for the Azoo Mignon 60 and used the "bio-filter" (aka dense sponge for bacteria to coat) and placed it into the Mignon 150. The sponge is obviously smaller than intended, but all intents and purposes, it works.

The filter does have an adjustable flow knob at the top of the intake. Contrary to the functionality of even the "top brands" of filters, this knob does make a significant difference in the flow. Also, this feature is not commonly found on smaller models of power filters. This makes it useful for tanks housing fry who can't fight current or may be sucked into the filter.

All I have to say about the noise level is that it is virtually silent. If the water gets too low in the tank, of course, the out-flow will make noise, but that's not an issue of the filter.

This was an affordable and fully functional power filter. It is worth every cent. The extra media that I put into the filter is not necessary. I would not advise this filter for anything larger than the tank I have, however.

P.S. Check out the photo(s) I have uploaded!

Want Azoo Mignon Filter 150 Power Filter Discount?

I have a regular 30 gallon tank. I don't think the plastic around the top is any wider than it is on any other tank, but this filter would not fit on it.

Marineland H.O.T. Magnum, 250GPH

Marineland PC0250HSB H.O.T. Magnum 250, up to 55-Gallon, 250GPHI bought this filter because My boss had the complete set with Bio Wheel, and Gravel cleaner and it was so great for gravel cleaning.

The basic version of this filter comes with,

1. A Media canister that can be filled with Active Carbon. A sample of carbon comes with this filter kit. I bought Ceramic Noodles at the pet store for the biological filtering properties to put in mine instead of the carbon.

2. The slip cover filter for the media insert.

3. A water polishing filter that reminds me of a Reusable pool ,or Jacuzzi filter.

4. Intake Tube, and strainer.

5. Pose-able Output Pipe with flow divert.

6. Understandable Directions.

Pluses.

1. It has an ON / OFF button on the back. I turn it off to feed the fish. Than back on to clean up.

2. The Output Pipe is underwater. Result, No noise from the filtered water hitting water surface.

3. The flow of the output can be aimed in any direction you want.

straight down, across, to the left,or right.

4. This filter is so quiet, I occasionally will check that the filter is on.

5. The diverter can be adjusted to focus, or fan out the water flow.

6. 250 Gallons an hour. Seems like a lot, but I have a 20 Hexagon high. I have the diverter fanning water out. It's not like a water hose. Just moving water well.

Minuses.

1. Disassembly and Assembly takes practice. You will want to keep instruction book for reference of the difference between regular filter Assembly, and water polishing filter assembly. once I leaned, I have been able to do on the tank. But most of the time the filter will have to be removed to a sink were It (filter) can be disassembled, Cleaned, or filter types changed, and reassembled.

Keep in mind that this, The cleaning of the filter canister seems to be the reason that people dislike this filter. But keep in mind that You will only clean it (filter) about every three months. Unless You over feed, and do not keep plants tidy.

If You get the Gravel Cleaning attachment, You can clean the gravel with the water polishing filter removing all the nastiness without siphoning off all your water out of the tank. You can then do your 20% water change.

I like this filter a lot, and think you will also.

I owned the HOT Magnum Canister Filter prior to upgrading to an Eheim Ecco Canister Filter. I had to upgrade because this filter couldn't keep up with my medium size saltwater tank. However this filter works great for freshwater tanks from small to medium size. It's fairly cheap and reliable. It cleans like a champ and supplies are fairly cheap to operate it. This is a good buy.

Buy Marineland H.O.T. Magnum, 250GPH Now

This is the best filter I have ever owned. I put it on my 20 gal tank and it is spotless. It filters by water almost 40 times every hour. It is really easy to take care of too. Just add carbon every month and that's it. Read the directions carefully. HINT: The directions are a little incomplete. When filling the filter with water, fill it till it overflows. That way you can be sure it's full. If not,you get an annoying running water sound. That brings up another positive. When it is full and you have a good seal, it is very quiet. My tank is in my bedroom and I have no trouble sleeping with the quiet motor.

Read Best Reviews of Marineland H.O.T. Magnum, 250GPH Here

OK, let me start with the CONS (all of which added up to me to reducing it only by one star, so they are obviously not THAT bad!) :

OK--the seals are very tricky. The first filter I got, I messed and messed with it for over 2 hours, using silicon sealer, etc, re-filling the canister, and re-starting it, and just COULD NOT get it to prime, it'd run awesome for 30 seconds, empty the canister, and blow air. Called the store, and they said that it sounded like I had it set up right, just sounded like it wasn't sealing, so bring it back. They advised that about 1 in 20 canister pumps they get do this, and not to worry about it. Took it back to the store, thoroughly disgusted but trusting that the reviews would turn out true since it has a good track record on every website (4-5 stars depending where you look). Got a second one, brought it home, filled the carbon, rinsed everything, plunked the carbon in and crossed my fingers. It primed up the very first time and has been running now for 24 hours with zero issues. This will be great for our turtle tank. We got tired of rinsing the little tiny pads for our ReptoMin waterfall and having to bypass some of the water to keep the pump from running dry.

I wish like CRAZY that the outlet/outflow side tube was longer/further down. The instructions advise you should have the water level above the level of the elbow in the outflow and that is REALLY short--I will have to keep an eye on my tank level carefully. Even an inch longer/lower on the outflow would help a ton. But, I just shoved a large-ish piece of tubing up the outlet so it curved down and most of the water from the outlet now goes straight into the tank. and the rest drips down the elbow. This meant I had to take off the square diffuser attachment, which was OK with me since this is a turtle tank, but I do say it's more suited to a fish tank than a turtle tank.

It does seem kind-of a mess to clean, but this is NO DIFFERENT than other canister filters. Of the four canister filters I have, this is actually the easiest/cleanest. Yes, the mechanical foam sleeve is a little delicate. But at least it's rinsable and replaceable unlike the Cascade I had which was just plain bio-floss and not rinseable so you lose some of your flora and fauna. And the foam sleeves are pretty cheap to replace, about $2-3 each which is a great deal!

I do wish it had more mechanical filtration but gosh, whatcha gonna ask when it's that tiny for a canister. You can use the scrubber attachment that comes with it for that, or get a bio-wheel, or add a second of these filters.

PROS:

It also takes up WAY less room and is far less bulky and unsightly than other canister filters since you don't have the tubing to contend with. We are very impressed with this aspect and still getting a "canister" filter.

It is a GREAT COMPROMISE between a canister filter and a tank-filter. Yeah, it takes up more room than most hang-on-tank filters, because of the button being in the way and you have to reach for it if you are going to use it, BUT, I love that the button is there, and that I can CHOOSE to either turn it off and/or unplug it instead of having to unplug at every junction.

I do love what other people have recommended about having two of these, one for scrubbing/mechanical filtration and one for carbon. It seems logical.

It's got a pretty good design and the motor is quiet once you have the water flowing in properly.

It seems to be fairly well constructed for a filter. I mean for the money.

Want Marineland H.O.T. Magnum, 250GPH Discount?

I love this filter for a medium sized tank. Has carbon, biological, and particle filtering all in one relatively small, and very quiet package.

Save 69% Off

Fluval 305 External Canister Filter - 110V, 260 gallons per hour

Fluval 305 External Canister Filter - 110V, 260 gallons per hourI currently own a 55 gallon tank with a pleco and an oscar, and this filter has kept my tank crystal clear since i got it. If you know oscars then you know how messy they can be. I highly recommend this filter to anyone with a 55 gallon tank. My roommate has a 150 gallon with 7 red devils and two plecos, and has the Fluval 304 (older model to this 305), and even his tank is clear, its not perfect but for being as clear as it is with only a filter made for a 70 gallon tank, i can honestly say that Fluval filters are GREAT products.

I purchased the Fluval 305 filter (from a different vendor) to replace an older Penguin 350. The install was in an established 55 gallon aquarium with two, 5 year old (mated pair) Jack Dempsey cichlids and several small Cory catfish. The set up was fairly easy and the water is now absolutely clear. The fish seem more active now, I'm guessing because of better quality water and the better overall circulation. The Penguin would do a good job of circulating water in one part of my (rather long) tank but the other half never got much flow. With the 305, I am able to angle the filtered water output so that I get total tank circulation. Also, the Fluval has much more filter media space and options, that makes a BIG difference. The price of the two above mentioned filters is way different. The Penguin 350 is a good filter, the Fluval is an excellent filter. The Fluval is truly worth the extra $$ and I would recommend the Fluval 305 to anyone. :)

Ken

Edit 12 Feb 2010 added:

As a FYI. The FLUVAL '3 Plus' filter pads WILL NOT fit this unit (too well, it is a little loose). You will want to purchase filter pads that says '204/304' on the package, and that works fine. The 204/304 media that I bought came in a two pack, four pads are required for a complete replacement. From my limited experience with this media It is 100% reusable, can be rinsed, and is fairly rugged. You may not need to replace it, I like to have some replacements on hand 'just in case' ;)

ken

Buy Fluval 305 External Canister Filter - 110V, 260 gallons per hour Now

First there are a few things to consider I have a 40gal tropical tank which is more than a little over capacity (fish-wise). I have had other filters in the past on other 29-55 gal tanks. Given this information this is one of the best filters I have had the pleasure of owning. This unit will keep the water very clear if you are willing to load the media in it correctly and do just a bit of maintenance. I also recommend using the "polisher" pads about 3-4 times a year as it does a fine job of Tidying Up. For those that have complained about priming when reconnecting Fill the filter with water at about the same temp as your tank. Then after connecting the unit and starting it up, gently rock the filter from front to back to release any trapped air. Also I would recommend NEVER changing the Biomass in the final stage Unless you have a major disaster in the tank. Also keep a spare impeller and outer seal on hand (just in case) while you may never need them, it would be better to have them and not need them than to need them and not have them. My personal mix of media is Carbon(very thoroughly rinsed) in the 1st stage, Clearmax in the second stage (followed on top by a polishing pad *Temporary*) then a mix of Eheim Substrat Pro and Fluval BIOMAX. Personally I would recommend against changing all of the Clearmax at one time, I change one side then the other in rotation. Similarly I would recommend against changing both front and back sponges at the same time. I replace the front and lightly clean the rear and rotate them (rear to front) quarterly as more than this is not needed and reduces beneficial bacteriological filtration. NOTE: While I am not an Expert, my fish are happy with my maintenance routine and the old man in the tank (a common pleco) is over a foot long after a couple of years and started as a mere 1.5 inch baby.

Read Best Reviews of Fluval 305 External Canister Filter - 110V, 260 gallons per hour Here

I have had my Fluval 305 for 4 months now.

Pros:

-Quite, very surprised at how very quite this guy is. I can hardly tell anything is on.

-great concept. Water is first filtered by mechanical filtration (sponges), then it makes its way upward through chemical (carbon) and biological filtration (clay beads). I have found the carbon replacement bags to be overly priced. My suggestion is to just buy yourself some bulk filter carbon and a filter bag and save yourself some money.

-Since the pump pulls the water through the canister, you don't risk shrimp or small fish that might get sucked up in the intake being chopped up by the pump. Instead they get as far as the sponge in the canister and stop there.

-Great customer service, called them one time and was never put on hold or heard nice music. The phone rings and someone actually answers.

Cons:

-Leak after 4 months. Not sure what caused it. The leak only occurs when the pump is off and a siphon has been created-creating higher water pressure in the canister. So I didn't experience a big leak in the middle of the night, I didn't notice. Rather it was after a water change. Customer service was great. However turn around time is about 10 days. Which means you'll have to find alternative filtration for that time. Also my O-ring was well lubricated with petroleum jelly after each cleaning-so it wasn't the problem. The customer service suggested a hairline crack, she said they have seen that before.

-I thought the clips on the side of the tank were a bit flimsy, as well as the flap that inserts the hose into the canister. I was expecting both to be more durable and create a tighter squeeze. Neither did on my canister. Maybe mine was a dud.

Overall I liked the product. I would give it 4.5 stars if the leak hadn't occurred. So I am discounting 1/2 a star for flimsy latches and flimsy hose flap and 1 star for the leak-which could have been a lot more drastic then it was. I will see how the replacement works and how customer service ultimately handles my claim. Will update.

Update:

Customer service was amazing. I am sure not many of the Hagen products have problems since I never was waiting on the phone very long for support. As mentioned above I noticed a leak in my filter once the siphon had started but the pump wasn't on-meaining there was water pressure in the canister from the siphon. I think once the pump was one the water pressure was less because the pump was moving water out of the siphon. I called customer service and they had me send out the entire canister for inspection. That cost about $14, which I paid. 10 days later I emailed them for an update. I think they had forgotten about me, because they asked for info on when I sent the product and the tracking number, etc. Once they got this info they immediately responded that they had discovered a hairline fracture in the motor head and would be sending me a new unit. I received the new unit in the mail 3 days later. However they forgot to return my canister-just the motor head. I called them about this and they apologized and overnighted me a canister, which I got the next day. I think complete turn around time was 15 days.

Since then this unit has worked just like the old, no leaks for me. The clips on this new unit are a bit tighter and require a bit more muscle to close the head onto the canister. The housing unit clip is still pretty flimsy, but it works, so i guess no need to complain about that. I think it deserves a 4.5 star rating and would certainly give it 5 stars if the unit last a few years. Since all my other hagen products have lasted forever, I don't see why this wouldn't.

Update:

Unit went out again, exact same problem as before. Leaking when there is siphon pressure and unit was not turned on. Not sure why, I am now wondering if I am doing something wrong. This unit was returned to Hagen with no issues and a 306 was sent as a replacement. It was still under its 2 yr warranty and just like before, no issues with the return. I am a bit more cautious with Hagen, though the warranty was well used. I am giving this product a final 4 stars.

Want Fluval 305 External Canister Filter - 110V, 260 gallons per hour Discount?

I have had this filter for almost a year and I have yet to find any fault with it. It holds lots of filter media (charcoal, ammo-carb, etc.) which gives it the ability I had hoped for long intervals between maintenance. I currently have this connected to a 29 gal. tetra tank (the fish, not the brand) and while I know that this filter is over-sized, it provides great filtration and the high rate of water flow (I have it wide open) seems to please my riverine tetras and they will frequently play in the current (a habit that seems to be related to feeding they grab food as it flows by). If I choose, I can use this for a larger tank in the future. The built-in primer pump is a great feature and makes it very easy to get a flow started. You will only need to use it once, unless you allow air into the intake line.

Setting up the filter will take some time. This is not a "hang on the back and plug it in" filter. You will find it much easier to install in an empty, or nearly so, aquarium. There are hoses to be cut and suction cups to hold them against the back wall of the tank. As you are cutting the hoses to fit, it will be obvious why this moves so much more water than the hanging style, and because you can mount the hoses at opposite ends of the tank, you will get superior filtration across the whole tank. I can easily go 6 weeks without a change I have 45 tetras and one plecostomus in the tank, so it is not a light load. I check chemical levels every week, and have never had an increase in ammonia, nitrates, or nitrites. The water is crystal clear. If you are adding this to an existing setup, reuse the old water so that there is a good supply of bacteria. The filter media will hang onto some of the bacteria (as it should) leaving a shortage in the tank. All new water would be inviting an ammonia bloom, so pick up some ammonia neutralizer to have on hand just in case (not a bad thing to have in your permanent maintenance kit). Take a few minutes to understand the logic behind the media placement, and you will be able to fine tune this filter to your individual needs. You can have more than one media per chamber, and you have six cambers to work with. Each chamber holds about three times the media present in the bio-bag of a hanging filter, so it is easy to see why it filters so well. I can't imagine ever using a different filter.

Save 63% Off

Finnex Temperature Controller Electronic Heater

Finnex Temperature Controller Electronic HeaterI needed to fix my made in Italy submersible glass heater I bought

from a large pet supply chain store. Initially it was 4 degrees F hotter

than its settings, and a few weeks later, by the time I bought this controller,

it would vary up to 10 degrees more before I manually modulated it (plug/unplug).

After adding this controller, the tank's water temperature stays contant

within 0-1 degree F. Setting on the dial is about 2F lower than my

thermometer's reading, but that's easy to deal with. This setup will work

as long as your heater produces full heat on one of its sensible settings.

If my heater completely fails to heat someday, I can be assured the

replacement heater can't overheat the tank either with this controller working.

One wish would be for some way to detach the probe (e.g. quick connect)

to make tank maintenance easier, as long as it stays reliable.

(An unpluggable temperature probe works for my electric wall oven.)

Recommended for anyone using electric heaters for their tank.

It prevents a heater's built in thermostat sticking on from cooking your fish.

If your thermostat control is poor but turns on, this unit can replace that feature.

I've been using this temperature controller on my 210 gal salt setup with an 800W JBJ titanium heater after the expensive JBJ digital controller died after only 6 months of use. I'm not a big fan of digital controllers as the are very suscetable to power line issues, surges and brown outs and such. I did have teh JBJ unit plugged into a smal UPS to protect it from such interference but it still failed anyway. Must have been poor quality. Not what you expect for a $200 heater pachage. So far the analog HC-0800 Finnex controller has worked flawlessly. The unit looks and feels very high quality and is doing just as good a job as the JBJ digital controller for a fraction of the price. It still needs to pass teh test of time but I have a feeling it will.

Buy Finnex Temperature Controller Electronic Heater Now

Have had it now for about 6 months. Works well.

I deducted one star as the dial moves too easily so I tape it in place to keep it from accidentally being bumped and moving too high in one direction or the other

Read Best Reviews of Finnex Temperature Controller Electronic Heater Here

my titanium heaters failed and Finnex did not replace (bad customer service)

the temp controller also failed after a few years....almost fried my fish!

there are better heater products out there

Want Finnex Temperature Controller Electronic Heater Discount?