Marina Hose Brush

I have used this on both fluval 404 and a 204 lines. It is easy to use, and you will be amazed at the gunk you flush out. I run the brush through, then run some water through the filter in my sink.

Once I detached the hoses, but that was such a pain, I didn't do that again.

I'd highly recommend this if you have fluval filters. AND, I'm sure it will work on other canister filter tubing as well.

I can't really tell if water flow is better after cleaning out the tubing, but I'm sure it is improved as well, and that can only be good for both the tank and the canister filter.

I've owned a hydration pack for years and the knew the hose was getting dirty. This brush, although softer than I hoped, works very well to clean out the dirt/gunk buildup inside the hose. It's not long enough to completely push through, so you'll have to go from both sides.

I've only used it once, but it seems sturdy enough for repeated use over years. Hopefully the plastic cord doesn't crack/break

Buy Marina Hose Brush Now

I was a bit skeptical about this product at first but all doubts were removed as soon as I used the brush. I cleaned out my aquarium hoses and filter head and now water is once again flowing through my system beautifully. The reason why I gave this item a 4 out of 5 was because the brush wires are wrapped around a metal head which cannot go around sharp corners. I was still able to get into every nook and cranny so I will definitely be buying another one of these in the future.

Read Best Reviews of Marina Hose Brush Here

For the past few years I have been using a Fluval cleaning brush to clean the tube hoses for my canister filters.

When it comes to cleaning these hoses this brush works well.

I have also used it to clean the straight parts of the intake tubes on my power filters. However, I was looking for a tube cleaning brush that would be able to reach into the 90 degree angles of the U-portion of these tubes, which is next to impossible to clean.

I thought this brush would be able to do so, however, the metal wire which contains the brush bristles is too long

to make the 90 degree turn.

So I am still searching for a tube cleaning brush which can travel through 90 degree angles.

For the money, this is a nice cleaning brush.

Want Marina Hose Brush Discount?

This brush does what it is supposed to do, snake it's way through a fish hose to clean out the gunk. Sure, it does that, but this product could be better

There are barely any bristles on the brush. This means I have to go back in and out often to get a good scrubbing.

Unwinding the body (the white plastic part) is a pain and since it keeps wanting to go back to it's default shape, it is a pain to feed this through a hose

I found that the body would bend often and instead of the brush continuing down the hose, the body was just bending into the house and the brush wasn't moving. Taking it out some and trying again eventually worked.

Honestly, I haven't seen anything that is quite like this. If anyone knows of a similar product that is better be sure to comment. But for now, it does what it needs to do but it takes some work to get there.

Save 76% Off