Coralife 05373 Aqualight Mounting Legs, Clear

These legs fit great on my 24 inch aqualight. Please note they do not fit on my aqualight mini.

I highly recommend these legs for anyone who owns a coralife aqualight other than the mini.

I got this item as shown, and it was a bit of a process getting them attached to my Coralife fixture. Once I had them screwed in I had to find a way to space them just so on the fixture as not to off set the lighting from the tank or allow it to fall into the water. I had two people to help my properly seat the mounting legs so the hugged the tank and then tighten them into place. Even after everything was erected the mounts came loose and became very wobbly.

Buy Coralife 05373 Aqualight Mounting Legs, Clear Now

I ordered these after noticing the format of the mounting leg attachment.

I recently purchased online (at a "Bidding" site) a 4-bulb T5 fixure, that had a hinge-type (swing up) mount.

Unfortunately, I was saddened to find I was unable to use that style mount, due to my use of a sliding-glass lid setup.

The supplied hinge/light support required an overlapping of the tank rim, to attach on the inside of the tank.

Upon researching for a hinge solution, I noticed that these mounted in the same style horizontal track, that runs accross the front and back of the light fixture housing.

These legs fit those style fixtures perfectly!

If your fixture has these "dove-tail" slots approx. 1/4" wide.....these are your option!

BOOOM!...end of a issue!

Read Best Reviews of Coralife 05373 Aqualight Mounting Legs, Clear Here

Without reviewing the light system, because that is not what we are talking about here and can all agree that hi-end lighting is the best.

As far as the leg supports: For four pieces of molded plastic, and four metal inserts to hold lighting for some systems that may cost in excess of $300 these are crappola!

We understand that when you clean your tank and remove the lighting system you must be careful however, if you are not being perfectly careful these things will crack. The metal inserts are far from perfect, and the screws that hold the metal in place with the legs are ever so small.

The light system needs to be supported on these units there either has to be a better way to support the unit, or the support system needs to be revamped.

I suggest that if you found a better way to support the unit put it online. We would all appreciate the advice.

Want Coralife 05373 Aqualight Mounting Legs, Clear Discount?

the item has a perfect quality. a multiple A A A A A A A A A A A+ product