I looked it several different pumps to power my aquaponics system. This unit was recommended by the guys at Friendly Aquaponics so I thought I couldn't go wrong. I have about 400 gallons in my system and the goal is to cycle at least that amount every hour. By the specs this pump should be more that enough to handle the job, but it seems a little underpowered to me and next time I think I will go with a larger Danner pump as the pump seems to be very well made. This is not like the cheap Chinese pumps you get off Ebay.It came with a basket that keeps a lot of the solid material out of the pump, but at the same time it doesn't have any problem pumping the fish waste or algae buildup. I have been running it for 2 and a half months and have not had to clean it out once. It has a standard 3/4 in pvc outlet so I was able to use pvc piping bought at the big box store.
Buy Danner 02527 Pondmaster 700 gph Pump Now
I've been purchasing pumps for my pond for many years until I found this one! It was a hassle to constantly readjust pump settings with every new pump I had purchased as these pumps don't last forever and manufactures don't use the same inlet diameters or tubes. But now the ONLY thing I've had to replace is the impeller which is why pumps end up failing in the first place, and other pumps you cannot replace this part alone. So I've purchased a few spare impellers,and they are very easy and cheaper to replace. I keep the same pump setting and I've only had to replace the impeller once thus far in the 2 years I've had this pump. And I think it was my fault. I could've extended the life of it had I kept the filters clean.I've read some reviews that the prefilter melts, deforms or looses it's shape. Yes, it does! But this does not justify lowering the rating of this pump. Mine lost its shape, but functions just fine. Who cares! It's under water!!
The key issue you need to keep in mind is that this pump might be a bit more expensive, BUT you can replace parts!! I've done my math and I can asure you that you end up saving money and time in the long run.
If you have had a pond for many years like I have, you know that somehow these pumps break down at the most inconvenient time. Then you can't find the same pump because manufactures change models constantly. Then the pump doesn't fit right, you now need a different diameter tubing, or the GPH somehow is not the same... forget it! Buy this one... and don't forget to always keep an Impeller replacement handy!!
Read Best Reviews of Danner 02527 Pondmaster 700 gph Pump Here
Put the pump (brand new out of the box) in a refilled/clean pond with everything perfectly clean. Worked for about an hour before it started stuttering. Sounded like air or something was caught in the impeller, but its perfectly clean, the pump is submerged completely. Pulled off the impeller to see if anything was caught, but it was perfectly clean. The Danner Mfg website is of no help. Also for the 1 hour or so it did work, the output was much less than expected (barely more than my 300gph we were replacing). All in all I'm quite disappointed.Want Danner 02527 Pondmaster 700 gph Pump Discount?
This replaced the same pump I had on my turtle pond for the past three years. It is a real great workhorse and they have upgraded the warranty on the pump from 3 to 5 years. It really pushes the water and the pond is crystal clear. I just wish it came with a better pre-filter. Thank goodness I saved the one from another pump that I had and I use it. Turtles can really clog up a filter fast. Just make sure you clean the filter regularly. That is what happened to my old one. The filter was dirty and clogged the pump and the impeller carved grooves in the pump. I highly recommend this pump or all the others from this company to anyone.Save 46% Off
0 comments:
Post a Comment