Titanium Ground Probe with 10 ft. Wire

After purchasing this probe, I found others (for the same price) that already have a "plug" on the end. This one is designed to be attached directly to the wall outlet's grounding screw. I have two problems with that... first, you can't just take it out because it's attached to the wall outlet. You'll have to at least use a screwdriver to remove it (providing your outlets face plate has the grounding screw). If not, you'll have to remove the face plate and then remove the ground. Second, I can't get to my wall outlet. I have two power strips running from the outlet (which is behind the middle of my tank and cannot be reached) into the aquarium stand. To make this work, I had to buy a replacement male plug to mount the probe wire to, so I could plug it into one of the power strips. I removed the two main prongs and left the ground prong(on the new replacement plug end). Then, to keep the plug stable, I glued a child proof outlet adapter to the plug to replace the two metal prongs that I removed. I basically had to make this probe to be like the other brand that already has all this which wound up costing a little more and wasted a bit of time. Next time I'll just buy the one that has a plug on the end. If you don't mind doing all that, then this probe is fine. The only way I could justify purchasing this one again would be if this one was on clearance at a really good price but at $15. You can get a finished product.

This works great. i have a tank stand that is open on the back and it was a piece of cake installing this. the trick is that you need to have the suction cap above the tank water level so I allow the tank to be a little lower on water for this setup. it sets up easily. i open the plate to the electrical outlet and then put this on the inside and put the plate back on. it has plenty of curve on the wire footage so no problem there. the fish looked at it for about half a day and now have forgotten about it totally. it does make the water very nice and clean. the city just put one of those horrid smart meters on the outside--i rent at the moment so had no say about it and boy did my fish react to that thing. this has calmed them down and they are okay now. i have one snail in one tank and it was ready to call it

quits when this smart meter was installed; this gadget did something and the snail has recovered and back to normal. the fish tank that is in the room where this smart meter is at was having problems. my siamese fighting fish knew something was amuck because he kept staring at where the meter was loaded and pretty much just stopped swimming. now that this probe is installed, they don't seem to be bothered by the meter. i can't be in the room where this meter was installed, but am finding wearing a copper necklace and a copper bracelet is helping. i started getting really severe headaches when the meter was installed and the fish reacting to it made it clear something was really wrong. i am working to move and when I do I will

have both my fish tanks not in the room the meter is against as it seems the room that it is against needs to be vacant or at least low use. Some landlords are not allowing the smart meter to be loaded as per the health and impact on residents, but my landlord allowed it and now people are having health impacts from it. i am elated this probe is helping my fish tank as it looked like I was going to lose my

fish residents if I didn't do something once this smart meter was loaded on to the apartment i live at. I just need to find a place the smart meter isn't loaded so I can be as happy as my fish are now.

So I have nothing but high praise for this probe. Just remember to keep the

suction cup above the tank water level. Installation is fast and easy.

Buy Titanium Ground Probe with 10 ft. Wire Now

I ordered four, since I have four tanks. The end that goes into the electrical "ground" has a little metal hoop that you're supposed to put in the electrical outlet. You unscrew the plate, insert the hoop over the center screw that goes into the ground, and simply screw it back in. Simple, right? But since all of my tanks are already established, it was not possible to reach the outlet for three of them. I really didn't want to drain my 75 gallon tank in order to make it light enough to move away from the wall in order to reach the outlet. So off we went to Lowes where a very helpful associate came up with a plan that wouldn't a) electrocute us or the fish and b) wouldn't burn the house down. We purchased 3 3-prong plugs . You unscrew the prongs from the plastic cover, feed the ground probe wire through the hole where the cord normally goes, insert it onto the ground, put it back together, and in the case of my overly cautious husband, wrap the probe wire/end of the plug with lots of electrical tape because the probe wire is very thin and the hole is large enough for a thicker diameter heavy duty extension cord. Plug it into the surge protector and it works perfectly. We tested the tanks before and after with an analog multimeter and the Titanium Ground Probes removed all voltage in the water. We can't tell a difference, but I'm sure the fish can.

Read Best Reviews of Titanium Ground Probe with 10 ft. Wire Here