Installation is easy, but if you have standard size hosing, do not expect it to slide all the way into the valve, because the tip gets wider as it reaches the valve's chamber. I installed the tube as far as I could and then gave it a good tuck to ensure it wouldn't come off during operation, it stayed nice and tight with no air leaks.
All in all, a good, inexpensive way to protect your air pump. A must have. Hope this helps.
P.S. I took and edited a couple of pictures of these. You can view them in the item gallery/images in case you are wondering the direction of which to install these.
UPDATE (Jan.2013):
It's been almost a year since I bought these (Jan.2012) and they still work. I have two air stones in my aquarium running 24/7 and the valves still let air through constantly and without a problem.These work and look nicer than the cheaper blue ones. What more is there to say about a little plastic valve. In response to the reviewer that couldn't figure out how they work. When you blow into the hole on each end, one way will allow air to pass through and the other won't. Install the tubing from the pump so that it can blow the air through the valve.
Buy 2 PCS Non-return Check Valves for Aquarium Air Pump Now
They are easy the put in the plastic tubing you use for the air supply. Nothing really to exciting to write about. They work.Read Best Reviews of 2 PCS Non-return Check Valves for Aquarium Air Pump Here
It takes a lot of pressure to push air through these valves. I couldn't even blow through one of them when I got it. I hooked them up to my shop air compressor and this seemed to loosen them up a little but I would not recommend them.Want 2 PCS Non-return Check Valves for Aquarium Air Pump Discount?
They work as intended, but require a verry strong pump or it will simply block air both ways. Not Great, meh at best.
0 comments:
Post a Comment