I have a pond with about 2,000 3,000 gallons, but because I have approximately 20 Koi the pond was a lot of upkeep prior to this filter. Know it's no effort.
Buy Tetra Pond Bio-Active Pressure Filters Now
I wish the intake and output holes were larger. My pump discharges a 1.5" pipe and I have to reduce it to a 1.25" pipe in order to connect to this filter. I had it for about a year now and it works well.Read Best Reviews of Tetra Pond Bio-Active Pressure Filters Here
Received as promised from Amazon. Installed filter to my 1000 gallon fish pond. Has been installed and running for 5 days now and already I can see the difference. My prior filter was to small, over the years my fish population has grown. So a new filter was in order. Tetra Pond Bio-Active Pressure Filter is working perfectly. On installation, I dug a hole and used the 20 gallon bucket (from a big box home store for around $10) and sat the filter in the bucket. I used 11/2" PVC pipe as my backwash with a union to make it easy to disconnect for winter storage. The only downside is it's all plastic, so be careful when tightening all fittings, I also recommend usingteflon tape on the fittings. 5 stars for both Amazon and Tetra!
Want Tetra Pond Bio-Active Pressure Filters Discount?
After looking at many filters I decided on this one to go along with the Tetra Pond Debris-Handling Pump DHP3600.My pond would not stay clear with my old pump and filter combo.
this filter and pump combo worked very well and with in 2 days i could already tell a difference that the pond was clearing. Using the back flush was a lot easier and more efficient than my old combo.
the only issue i have with this set up is the hose connections. to remove the hoses from the filter you need to undo the hose clamps which can be a minor inconvenience.
after about a week i had to open up the filter and clean it as a ton of sludge build up in there, i have back flushed it once since then and all is going well.
over all I am very happy with this filter.
0 comments:
Post a Comment